Cam Question.
Grand Champion
Joined: May 2006
Posts: 6,041
Likes: 0
From: Gilbert, Arizona
If I recall, the OP wants to run a cam on the Superchips tune. If thats the case, good luck. For torque grinds you've got your choice of the 260 or sidewinder, and both of those will be hit or miss as far as the 03's are concerned running on a canned tune.
yeah im running a KRC 210 on a 110lsa, but I may have gotten lucky. No two 03 motors seem to be the same as far as ease of tuning goes. for your best bet, you may need to end up going custom tuned. Either way, your pcm still might not accept it. hemi's are extremely finicky towards tuning. Hate to be the debby-downer, but I say it like it is. I got lucky. You might not.
yeah im running a KRC 210 on a 110lsa, but I may have gotten lucky. No two 03 motors seem to be the same as far as ease of tuning goes. for your best bet, you may need to end up going custom tuned. Either way, your pcm still might not accept it. hemi's are extremely finicky towards tuning. Hate to be the debby-downer, but I say it like it is. I got lucky. You might not.
Record Breaker
Joined: Jun 2010
Posts: 1,115
Likes: 0
Sorry i mean was as in pre mods lol
My idle now is 700 N/P and D is about 725 no A/C and 775 w/ AC.
My idle now is 700 N/P and D is about 725 no A/C and 775 w/ AC.
Last edited by SLT8; Nov 24, 2010 at 02:53 PM.
