When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
15.5 is too wide for stock 9" wide wheels. Also the backspacing on stock wheels will cause them to rub when turning. 36" tall tires might be to big with just a level as well
nope...aint gonna happen...not with the wheels u got. your gonna need a new set of wheels, then after u get a new set the for sure they'll fit with a leveling kit on
nope...aint gonna happen...not with the wheels u got. your gonna need a new set of wheels, then after u get a new set the for sure they'll fit with a leveling kit on
I dont know about that. He will rub pretty bad I think
With a 36" tall tire, 15.5 is very wide. Even on a smaller 33" tire, you would have some rubbing with that wide of a tire not to mention you need atleast a 10" wide wheel if not 11" for a 15.5" wide tire.
36x12.5x20's rub with a level and proper backspacing. Add 3" of width and you will rub alot with a tall tire. You need to go smaller in diameter to clear.
35x13.5x20 is probably the biggest tire you can get away with minor rubbing.
nah he will fit a 36" tire pretty snug, but yes he is goin to need a 10" wide wheel. but the wheel is goin to need a big negative offset. cuz im runnin 35" on my stock 4x4 suspension with no rubbin and no problems