3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Hemi plug preferences

Old Dec 7, 2012 | 10:57 PM
  #1  
mike01's Avatar
mike01
Thread Starter
|
Registered User
Joined: Nov 2012
Posts: 4
Likes: 0
Default Hemi plug preferences

The Little Woman has an '06 1500 Ram 4x4 with a Hemi in it. Any one out there more familiar with these engines than I am have the hot setup on brand of plug and heat range that will compliment... milage and occaisional towing at 5000 ft in Nevada.

Thanks, Mike
 
Reply
Old Dec 8, 2012 | 07:28 AM
  #2  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

standard copper plugs. and standard heatrange.
Alot of guys run NGK, some are using Autolite's.
Stay away from Platinum or Iridium plugs.

Ohh, an you'll need 16plugs since there are 2 per cylinder.

They are due every 30kmi btw. You can get away with 40kmi if your all highway.
 
Reply
Old Dec 8, 2012 | 08:39 AM
  #3  
loflyer2's Avatar
loflyer2
Professional
Joined: Mar 2010
Posts: 107
Likes: 0
From: Chesapeake, VA
Default

Champion coppers work great. Part #570. I agree with dirty's 40k recommendation; plugs still look good at 30k, but definite wear at 50k. I noticed difference with wire change at 60k also.
 
Reply
Old Dec 8, 2012 | 09:05 AM
  #4  
p38251's Avatar
p38251
Record Breaker
Joined: Feb 2011
Posts: 2,001
Likes: 0
From: Vanderpool Texas
Default

Ditto on standard champ coppers. Made the mistake once running double platniums. Truck ran great for 10k. Then random misfires. Replaced with coppers go to go no more issues.
 
Reply
Old Dec 8, 2012 | 09:37 AM
  #5  
Albertaramfan's Avatar
Albertaramfan
Captain
Joined: Aug 2009
Posts: 631
Likes: 0
From: Calgary, Alberta, Canada
Default

Also got great results with sticking to the coppers. Don't let the parts guy try and convince you that they are no good for your hemi
 
Reply
Old Dec 8, 2012 | 03:27 PM
  #6  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

Yep, standard (cheap) coppers do fine. Have personally seen a Hemi run like total crap on a brand new set of Bosch Platinum plugs and then run like a top after helping the owner change out to Champion Coppers. Standard NGKs would also be a great choice...
 

Last edited by HammerZ71; Dec 8, 2012 at 04:02 PM.
Reply
Old Dec 8, 2012 | 10:16 PM
  #7  
08HEMI1500's Avatar
08HEMI1500
Record Breaker
Joined: Aug 2009
Posts: 1,831
Likes: 3
From: Tampa, FL
Default

Originally Posted by Albertaramfan
Also got great results with sticking to the coppers. Don't let the parts guy try and convince you that they are no good for your hemi
Couldn't agree with this more. The guy at AAP tried to get me to buy iridiums and tried telling me they were the stock plug from the factory. Had i nor known better I would have believed him but I took my business to Autozone and they knew the stock plug was the copper Champion.
 
Reply
Old Dec 10, 2012 | 04:09 PM
  #8  
Old Man with a hemi's Avatar
Old Man with a hemi
Veteran
Joined: Jun 2012
Posts: 400
Likes: 0
From: Woodbury Tn
Default

Originally Posted by mike01
The Little Woman has an '06 1500 Ram 4x4 with a Hemi in it. Any one out there more familiar with these engines than I am have the hot setup on brand of plug and heat range that will compliment... milage and occaisional towing at 5000 ft in Nevada.

Thanks, Mike
My 06 had 50,000 miles on the originals, and still looked good. I put autolite double platinums in when I changed and now have 106,000 miles with never a miss and still running perfectly. I drive mostly interstate
 
Reply
Old Dec 10, 2012 | 09:26 PM
  #9  
AF-Hemi57's Avatar
AF-Hemi57
Registered User
Joined: Dec 2012
Posts: 20
Likes: 0
Default

Anyone have any experience with the E3 plugs?
 
Reply
Old Dec 11, 2012 | 09:49 AM
  #10  
whitesquall's Avatar
whitesquall
Registered User
Joined: Dec 2012
Posts: 15
Likes: 0
Default

Ditto... I tried the Bosch Platinum, Irridium and with both my 03 1500 Hemi ran like S**t
Only when I put the Champion standard heat range coppers did it run like a CHAMP!

NO complants here, especially when you gotta buy 16 of those little suckers!

HTH's
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:20 PM.