When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Help! Overhead console swap in 06 ram from OTIS to EVIC
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Tried swapping in part no 56046038AC from an 07 Durango, as others have done in their 06-08 Rams. Did not work. Checked the connector pin outs for both my truck and the Durango, they are the same. Should work, but does not. It does however work in the 08. Swapped it into a buddies truck, and it worked the first time, without any additional steps, while the truck was running. Anyone have any idea about doing this on an 06?
well then your TIPM system may not be compatible... Ask Dodge Cares if that OTIS was even an available option for 2006.. if it wasn't then that is your issue, then you can sell it to me since you beat me to it on Ebay :-P
well then your TIPM system may not be compatible... Ask Dodge Cares if that OTIS was even an available option for 2006.. if it wasn't then that is your issue, then you can sell it to me since you beat me to it on Ebay :-P
How do I get a hold of Dodge Cares? I know that the EVIC was an option for 2006, because my brother in law has an 06 2500 CTD that has it. I just don't know what models and part numbers. I guess I'm going to have to persuade him to take down his overhead console and get his part number.
As far as selling the EVIC I bought, it's already been sold and installed.