3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Po307 and po172

Thread Tools
 
Search this Thread
 
Old Mar 5, 2018 | 04:11 PM
  #1  
gobeyus@hotmail.com's Avatar
gobeyus@hotmail.com
Thread Starter
|
Registered User
Joined: Mar 2018
Posts: 2
Likes: 0
Default Po307 and po172

Ok i have a 04 ram 5.7 hemi i have a shudder at driving speed. Ive replaced 7 coil plugs wires injecters cam sens crank sens up strem 02 bank 1 map sens maf sens iat sens. It has a rough idle as well. Drive shaft u joints are good.all tires are true when you driving say at idle speed cruzing speed say 100klm you feel a slight shudder give it a bit of gas its shudders bad. Im mechanically incline been wrenching for thowsands of years but im stumped. Could it be valve springs
 
Reply
Old Mar 7, 2018 | 07:25 AM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
Default

You have addressed all the electrical components..... that leaves mechanical. Time to do a compression test I think.
 
Reply
Old Mar 7, 2018 | 11:09 AM
  #3  
gobeyus@hotmail.com's Avatar
gobeyus@hotmail.com
Thread Starter
|
Registered User
Joined: Mar 2018
Posts: 2
Likes: 0
Default

Im assuming comp on the hemi is about 180 psi. I ordered a valve spring set im going to do them any way even if comp is normal the old girl has 380 thousand klm on her
 
Reply




All times are GMT -4. The time now is 01:37 PM.