No Start
#1
No Start
I was driving yesterday and the red lighting bolt and CEL came on. I cleared the lighting bolt but not the CEL. Drove fine for awhile with several starts and stops of the engine. Then I could not get it to start. Called a tow truck, when the tow truck got there I tried to start it and it stared up. So i drove it home, killed it and it would not start again. I have put a new throttle body and crank sensor on it and it still will not start. I ran the codes and I have no codes. The CEL flashes 10 times then stays on. I am at a loss as to what it can be.
#2
#4
Ok, according to theory......... the CEL blinking with ignition on, engine NOT running, means the PCM is still in diagnostic mode...... Supposedly, it should get over that in a few minutes. If it doesn't, disconnect the battery, turn on the headlights for 15 seconds, (to drain residual energy in various systems) hook the battery back up, and see what happens.
This is just what google tells me. I have no idea if this will actually work or not. Worth a shot at least.
This is just what google tells me. I have no idea if this will actually work or not. Worth a shot at least.
#6
#7
Trending Topics
#8