3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Engine and ETC light/ truck stalling, need help!?

Thread Tools
 
Search this Thread
 
Old Mar 10, 2007 | 10:55 PM
  #1  
Javier0351's Avatar
Javier0351
Thread Starter
Joined: Mar 2007
Posts: 7
Likes: 0
Default Engine and ETC light/ truck stalling, need help!?

I have a 2003 Dodge Ram 1500 w/ Hemi. But my engine light along with a blinking ETC has appeared on my dash. The truck has staled on me several times especially when im taking left turns. It becomes very sluggish and itidels alot. Im also getting a P2175 and P2106 code. Can anyone please help or decipher these codes? If so please help me out.
 
Reply
Old Mar 11, 2007 | 10:34 PM
  #2  
CarGuyOhio's Avatar
CarGuyOhio
Admin formally known as 94rt10ohio
Joined: Apr 2005
Posts: 9,025
Likes: 3
From: Curtice, OH
Default RE: Engine and ETC light/ truck stalling, need help!?

P2175 Throttle Actuator, low air flow detected
P2106 Throttle Actuator, Forced limited power

Sounds like the engine is starving for air.
 
Reply
Old Mar 12, 2007 | 04:08 AM
  #3  
Javier0351's Avatar
Javier0351
Thread Starter
Joined: Mar 2007
Posts: 7
Likes: 0
Default RE: Engine and ETC light/ truck stalling, need help!?

Thanks for responding!! What do you recommend I do??
 
Reply
Old Mar 12, 2007 | 02:53 PM
  #4  
crashedcdo's Avatar
crashedcdo
Rookie
Joined: Jul 2006
Posts: 56
Likes: 0
Default RE: Engine and ETC light/ truck stalling, need help!?

could it be as simple as a dirty air cleaner?
 
Reply
Old Mar 12, 2007 | 08:41 PM
  #5  
kenihemi's Avatar
kenihemi
All Star
Joined: May 2005
Posts: 946
Likes: 1
From:
Default RE: Engine and ETC light/ truck stalling, need help!?

You can try resetting the pcm and see if it returns.

If it does, then check the connector at the throttle body.

If that don't work, its dealer time.
 
Reply
Old Mar 13, 2007 | 03:01 PM
  #6  
Javier0351's Avatar
Javier0351
Thread Starter
Joined: Mar 2007
Posts: 7
Likes: 0
Default RE: Engine and ETC light/ truck stalling, need help!?

This is probably a dumb question, but where exactly is the throttle body located at? And how do i reset the pcm??
 
Reply
Old Mar 13, 2007 | 04:40 PM
  #7  
kenihemi's Avatar
kenihemi
All Star
Joined: May 2005
Posts: 946
Likes: 1
From:
Default RE: Engine and ETC light/ truck stalling, need help!?

The throttle body is in the center/rear of the top of the engine. The airbox and hose feeds into it.

But, your problem could also be the electronic thottle assembly below and just behind the battery.

To reset the pcm, look at the underneath of your fuse box lid and find the number of the fuse for the pcm/skim.

Pull that fuse, buckle the driver seat belt and turn the key to start (it won't start) and wait for 2 chimes. That will reset the pcm and trans.


 
Reply
Old Mar 19, 2007 | 09:38 PM
  #8  
Javier0351's Avatar
Javier0351
Thread Starter
Joined: Mar 2007
Posts: 7
Likes: 0
Default RE: Engine and ETC light/ truck stalling, need help!?

I reset the pcm and at first the truck kept turning off on me. Once i got on the road it was fine for a day or two then back to the norm. Idles, stalls and at times it accellerates on own.
 
Reply
Old Mar 19, 2007 | 10:13 PM
  #9  
kenihemi's Avatar
kenihemi
All Star
Joined: May 2005
Posts: 946
Likes: 1
From:
Default RE: Engine and ETC light/ truck stalling, need help!?

Dealer time.
 
Reply
Old Mar 20, 2007 | 03:00 AM
  #10  
Javier0351's Avatar
Javier0351
Thread Starter
Joined: Mar 2007
Posts: 7
Likes: 0
Default RE: Engine and ETC light/ truck stalling, need help!?

Someone told me that it could be my O2 sensor. If so could that be something i can do myself if so where is it located? What do you think?
 
Reply



All times are GMT -4. The time now is 06:05 PM.