Rambo, 37's and a whole lot more.
#11
#12
I had the guys at VICE build me one of their cool bumpers in aluminum. It was the first aluminum one they had built. I sprayed it in Raptor bed liner. Still have the lights to install. https://www.vicedesign.ca/bumpers
#13
#15
#17
Thanks THREE-D. I do love my Dakota.
Dodge suspends the front diff from the engine mounts which is a real pain when your not using the stock mounts for the engine.
Made up some new mounts that just hold the front diff and they are suspended in the stock location on poly bushings. The nose of the diff is braced down to the cross member with a poly bushing just like a sway bar link. The bolts with the big nut spacers are temporary. ;>
Dodge suspends the front diff from the engine mounts which is a real pain when your not using the stock mounts for the engine.
Made up some new mounts that just hold the front diff and they are suspended in the stock location on poly bushings. The nose of the diff is braced down to the cross member with a poly bushing just like a sway bar link. The bolts with the big nut spacers are temporary. ;>
The following users liked this post:
Motohead1 (05-16-2021)
#19