Ram 4th Gen Do It Yourself Information
#13
04-28-2009 | 03:23 AM
Professional
Joined: Dec 2008
Posts: 201
Likes: 0
From: Alberta
So i thought i would do a simple job of installing new hi-beam bulbs in my truck today.
NOT a simple job!
you have to remove the shroud on top of the rad. remove the grille. remove the headlight. then you have access to the headlight bulbs!!
NOT a simple job!
you have to remove the shroud on top of the rad. remove the grille. remove the headlight. then you have access to the headlight bulbs!!
#14
05-09-2009 | 09:02 AM
Veteran
Joined: Dec 2006
Posts: 253
Likes: 1
Not do it yourself. No Recall/TSB sticky here
Here is the latest recall on the Dodge Ram 1500. Models with manual temerature control. (MTC)
NHTSA Campaign ID number :09V158000.
Software update only.
http://www-odi.nhtsa.dot.gov/recalls...e&refurl=email
Here is the latest recall on the Dodge Ram 1500. Models with manual temerature control. (MTC)
NHTSA Campaign ID number :09V158000.
Software update only.
http://www-odi.nhtsa.dot.gov/recalls...e&refurl=email
Last edited by blue2050; 05-09-2009 at 09:09 AM.
#15
05-15-2009 | 10:13 PM
Veteran
Joined: Apr 2009
Posts: 422
Likes: 4
From: Indiana
Installing the quad cab fold flat load floor in a crew cab
DIY is now posted for adding this to a crew cab. https://dodgeforum.com/forum/diy-do-...ionetwork.html
#16
06-13-2009 | 12:31 AM
Registered User
Joined: Jun 2009
Posts: 15
Likes: 0
Good price on ST?
First great forum! I appreciate the hospitality and patience with new folks here that I haven't seen in other forums. I searched around here but didn't see anyone mention good prices on an 09 ST regular cab V6. Looking for my teenage son's first truck and found one new for $15, 700 ($22,400 mSRP). What do you guys think?
#17
08-02-2009 | 12:40 PM
Rookie
Joined: Jan 2008
Posts: 71
Likes: 0
From:
Regarding the oil filter, I had bought Frams TG2 Toughguard, according to Frams site this correct ?
http://www.power-21.com/FramPower21i...ation.aspx?b=F
http://www.power-21.com/FramPower21i...ation.aspx?b=F
#19
11-10-2009 | 11:35 AM
Professional
Joined: Jul 2009
Posts: 129
Likes: 0
From: alamogordo, NM
XDI Intake increase gas milage and is available. Louder intake noise when you get on it.
Only place I know to get the XDI for the 2009 hemi is
http://www.totalappearance.com/
You haveto call, talk to Tim. XDI does not sell to the public
...and if you write XDI from Florida XDI tells total apperance to call you.
https://dodgeforum.com/forum/4th-gen...cessories.html
Only place I know to get the XDI for the 2009 hemi is
http://www.totalappearance.com/
You haveto call, talk to Tim. XDI does not sell to the public
...and if you write XDI from Florida XDI tells total apperance to call you.
https://dodgeforum.com/forum/4th-gen...cessories.html
just FYI
#20
11-17-2009 | 10:37 PM
Registered User
Joined: Feb 2007
Posts: 3
Likes: 0
From: Colorado Springs
I just installed my aFe intake and now my maintenance indicator light is on. I'm assuming its on because I had to disconnect my temperature sensor during the install. Has this happened to anyone else and if so, how do I reset it?