When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4th Gen Ram Tech2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Here's what I've come up with for 1st initial design for the replacement 2009 tailgate badge. An updated pic will follow.
Final product will be a 3D surface made of T6 Aluminum with an illuminated silhouette. When lit, a (red) glow will be seen around just face of the Decepticon image. Total thickness about 3/8 to 1/2 thick with illumination.
no... i still hvent got around to sending him my tail gate emblem.. i donbt like the idea of taking mine off and driving around liek that for a month... and i thought about ordering one on ebay and sending that one to him but i cant seem to get one for less than $30
Can't you send it to him for a day or so just so he can take measurements? Or even take the measurements yourself. As long as your careful I'm sure the fit will be moderately forgiving.
I contacted billet technology about them and they said the 06-08 would fit but have nothing for the tailgate yet.
Billet Technology is a good company that makes great products. They have been making badges for Chrysler products for years. http://www.billettechnology.com/
I replaced the emblem on My Charger through billettechnology.com. I saw samples threw another site cant remember where, then called them telling what I was looking for. They were great to work with and can make almost anything you want. I gave a picture of the emblem before I mounted it. Hope this helps.