Here is the Plan for the 2009 Ram 1500 4x4
Registered User
Joined: May 2009
Posts: 25
Likes: 0
From: Iowa
I see when I bring up the link it lists your mods at the bottom. Question, the Lockpick V2.....where purchased, $$ and who installed? Hard?
Also, I want to change out the sub to get more "kick" out of the system. I have the Alpine system. Can a person swap out the factory with a 10" (or whatever size it is) with an aftermarket and call it good or should an amp be added as well? I think the stock system sounds decent with Sirius / Radio and MUCH better with CD or IPOD! Also, do you (or anyone) know anyone with the IPOD cable so one can control IPOD from head unit?
Thanks and nice truck!
Also, I want to change out the sub to get more "kick" out of the system. I have the Alpine system. Can a person swap out the factory with a 10" (or whatever size it is) with an aftermarket and call it good or should an amp be added as well? I think the stock system sounds decent with Sirius / Radio and MUCH better with CD or IPOD! Also, do you (or anyone) know anyone with the IPOD cable so one can control IPOD from head unit?
Thanks and nice truck!
Amateur
Joined: Jun 2009
Posts: 40
Likes: 0
From: Utah
Really the hard part is done. Speakers are a breeze to install in the doors. Tweeters are just as easy. I just finished my install last weekend.
REN- Headunit
Lockpick (video out to two Sony 8" Dvd Monitors)
Diamond Audio 90x4 to Diamond Audio 6x9's in doors (dynamat behind) and Diamond Audio tweeters in dash
Diamond Audio 400x1 to two Boston G210 subs
Audiocontrol 3xs Crossover
2.0 farad Cap
PAC CHR-3 plug in line out adapter (no splicing)
1/0 power cable from Battery to splitter
Sounds aaaaaaaamazing!!!
Good luck on your install!
REN- Headunit
Lockpick (video out to two Sony 8" Dvd Monitors)
Diamond Audio 90x4 to Diamond Audio 6x9's in doors (dynamat behind) and Diamond Audio tweeters in dash
Diamond Audio 400x1 to two Boston G210 subs
Audiocontrol 3xs Crossover
2.0 farad Cap
PAC CHR-3 plug in line out adapter (no splicing)
1/0 power cable from Battery to splitter
Sounds aaaaaaaamazing!!!
Good luck on your install!
Last edited by 2009detonateryellow; Jul 17, 2009 at 08:30 PM.
Trending Topics
Amateur
Joined: Jun 2009
Posts: 40
Likes: 0
From: Utah
I must suck then. lol
Sounds like a very nice system i like your amp and spks, i have some questions you have a 2009 ram 1500 right?
1st) how did you install the dynamat? did you pull off the black plastic inner door panel? if so where inside the door did you put the dynamat?
2nd) the pac C2A-CHY3 says its for use only on cars with a "premium" audio system? did you have factory amps? The whole reason i bought the audiocontrol lc6i line output converter is because i couldnt find a pac product that says it would work?!? the lc6 is going to make installing the amp alot more work, using the c2a-chy3 do you still have fader contol?
man if all you had to do is plug that in and run rca's to your amps then you suck
for being smarter than i am
Please answer if you have time these are questions i have really been looking for an answer to.
Thanks
Lee
1st) how did you install the dynamat? did you pull off the black plastic inner door panel? if so where inside the door did you put the dynamat?
2nd) the pac C2A-CHY3 says its for use only on cars with a "premium" audio system? did you have factory amps? The whole reason i bought the audiocontrol lc6i line output converter is because i couldnt find a pac product that says it would work?!? the lc6 is going to make installing the amp alot more work, using the c2a-chy3 do you still have fader contol?
man if all you had to do is plug that in and run rca's to your amps then you suck
for being smarter than i am Please answer if you have time these are questions i have really been looking for an answer to.
Thanks
Lee