4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

will crank but wont start. rwplaced creank and cam sensor

Thread Tools
 
Search this Thread
 
Old Jul 26, 2018 | 09:07 PM
  #1  
Daren's Avatar
Daren
Thread Starter
|
Registered User
Joined: Jul 2018
Posts: 1
Likes: 0
Default will crank but wont start. rwplaced creank and cam sensor

my 2014 ram 1500 will crank wont start replaced crank and cam sensor still no start
 
Reply
Old Jul 27, 2018 | 07:26 AM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,478
Likes: 4,223
From: Clayton MI
Default

Moving to fourth gen ram section.
 
Reply
Old Jul 27, 2018 | 07:46 AM
  #3  
SHO Rod's Avatar
SHO Rod
Record Breaker
10 Year Member
Liked
Loved
Community Favorite
Joined: Feb 2015
Posts: 1,130
Likes: 55
From: Iowa
Default

Have you checked for spark and fuel pressure?

-Rod
 
Reply
Old Jul 30, 2018 | 01:43 PM
  #4  
Robert Jones 1968's Avatar
Robert Jones 1968
Registered User
Joined: Sep 2017
Posts: 12
Likes: 0
From: Winnipeg Manitoba
Default

i second that .. fuel pump relay dies check for power to the fuel pump while cranking
it should be blue (with an orange trace) wire in the 40-way electrical connector under the tipm .
see this document
https://drive.google.com/file/d/1slf...ew?usp=sharing
 
Reply
Old Jul 31, 2018 | 01:01 AM
  #5  
daktwos's Avatar
daktwos
Professional
Joined: Feb 2018
Posts: 198
Likes: 7
From: NH
Default

Try removing the snorkel to the throttle body and shoot a small squirt of starting fluid into throttle body and replace snorkel.No need to tighten,just put back on to prevent backfire.Crank engine over and see if it runs for a few seconds then stalls out.If yes,it's a fuel supply issue,likely bad pump,relay,regulator etc.
 
Reply




All times are GMT -4. The time now is 10:58 AM.