7" CST 2WD Lift Kit
#1
7" CST 2WD Lift Kit
Just put it on my truck not long ago with a 3" body lift. Decided to take it off and go bigger so im getting a custom lift built. This is for the 2009-2010 Dodge Ram w/Hemi. If you have a non Hemi truck you will have to purchase the coils they sell. Its a 7" lift by CST (California Super Truck). The kit with shocks sells for $1800 plus shipping. Will sell mine for $1500 shipped anywhere in the lower 48 states. Here is a few pics.
The Hemi Truck does not come with the coils for the front. Instead it is a coil spring spacer due to their coils not being strong enough for the extra weight of the Hemi motor.
Below is my truck with the lift installed and a 3" body lift added on 38s. I wouldnt suggest anything over a 37" cause we do have rubbing issues when turning.
The 7" lift will allow you to easily clear 35s.
The Hemi Truck does not come with the coils for the front. Instead it is a coil spring spacer due to their coils not being strong enough for the extra weight of the Hemi motor.
Below is my truck with the lift installed and a 3" body lift added on 38s. I wouldnt suggest anything over a 37" cause we do have rubbing issues when turning.
The 7" lift will allow you to easily clear 35s.
#6
Heck yea! I knew you could put bigger then the 35" tire they list on their website as the biggest you can run with the kit. Looks great! If you hear anyone lookin for a kit send them my way. Gota get rid of it.
Trending Topics
#8
with the 3 inch body lift on there you should be able to clear them 38s with wheel spacers or a different backspacing on your rims.
Not sure if them are 38s but looks like you have lots of room
Not sure if them are 38s but looks like you have lots of room
#9
i know i can clear with a different offset but thats not the look we are going for. could also clear with a not so wide wheel but then a 15.50 isnt gonna fit a 10 wide wheel. but i dont think a wheel spacer would do anything, they rub pretty hard at a hard turn but its because my offset. but ive already taken the lift off and the 19" lift will be done at the end of the month.