ohhhhh you want two
just double the width of that box +.75 for the seperator, or build two of them
Im too tired to mess with paint anymore lol

And if your getting two you will need two of those amps or one better one.

 

I threw ths togrther in like 1 minute on paint, this is what i was going for, it also has the dimensions of the box u posted




[IMG]local://upfiles/17790/D32D5EB1BFA3472ABE3A9F198B03CAA7.jpg[/IMG]

 

That will be fine, as long as its not slanted, i cant tell from the pic lol

 

The front is slanted a lil bit. and if I were to get one better amp which one would u recomend?

 

http://www.crutchfield.com/S-C3aIKD7...9RAA1000&g=130
That will overpower them a little, but they should handle it fine

As for the box, you will need to recalculate the volume if you slanted it, 1.25 is optimal.



Its 2:15 im going to bed i'll be back on tommorrow to help you out

 

may be ill stick w/ the straight front. and whats the difference between 4 and 2 ohms? and which one is better?

 

ohms that you want all depends on the amp you are getting. With that amp, you would want to get the dual 4 ohm versions of the sub

 

Would the 2 ohm version of the alpine sub i posted be ok? and would that MB quart Amp be able to power both subs?

 

You want the dual 4 ohm if your gonna get that amp....

 

So how many Subs can be hooked up to the MB Quart amp? the RMS on the Alpines is 300W, and the description of the Amp says 250W RMS @ 4 ohms.