how do u post pics
#2
#4
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
You can also use myspace. If you are using firefox then you can right click the picture and click "copy image location" then paste it to the picture icon in the post window on here and the pictures will show up.
If you are talking about the signature picture then you can go to the userCP and edit your signature there. You can upload a picture to the forum or you can host it on a picture sharing web site and use the image code.
If you are talking about the signature picture then you can go to the userCP and edit your signature there. You can upload a picture to the forum or you can host it on a picture sharing web site and use the image code.
#6
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
The same way you just did.
Did you mean how do you start a new thread? You need to go the the forum that the question needs to be in like 2nd gen ram if you have a 94-01 ram or 3rd gen ram if you have an 02-08 ram then click "new thread" in the top left corner of the page.
Did you mean how do you start a new thread? You need to go the the forum that the question needs to be in like 2nd gen ram if you have a 94-01 ram or 3rd gen ram if you have an 02-08 ram then click "new thread" in the top left corner of the page.
Last edited by Sheriff420; 08-02-2010 at 09:25 PM.
#7
Trending Topics
#9
I figured out how to post photos, very easy from the instructions listed, but I still have a problem adding a signature photo. Could it be that the camera I am using is simply to many megapixels? Do I somehow need to use a lower megapixel camera or setting to meet the file size requirement?
Thanks-
Thanks-
#10
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
Open MS Paint.
Hit ctrl+W.
That will open the sketch and skew window.
Put 75 in the horizontal and vertical boxes then click ok.
Hit ctrl+E and that will open the attributes window and you will see the size.
If the size is still too big then do it again with high numbers (90/95) until you get the picture down to the right size.
Hit ctrl+W.
That will open the sketch and skew window.
Put 75 in the horizontal and vertical boxes then click ok.
Hit ctrl+E and that will open the attributes window and you will see the size.
If the size is still too big then do it again with high numbers (90/95) until you get the picture down to the right size.