Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

rockers chatter

Thread Tools
 
Search this Thread
 
Old Mar 31, 2007 | 06:29 PM
  #1  
Kev_n_AZ's Avatar
Kev_n_AZ
Thread Starter
|
Banned
Joined: Feb 2007
Posts: 2,619
Likes: 0
From:
Default rockers chatter

probably been posted on before....

are ya supposed to hear the rockers chatter every time you let off the accelerator?

should i just adjust em a bit?

 
Reply
Old Mar 31, 2007 | 11:09 PM
  #2  
Ralph78's Avatar
Ralph78
Professional
Joined: Apr 2006
Posts: 192
Likes: 0
From:
Default RE: rockers chatter

Is it rocker lash or just "Diesel" noise?

It sure would be a good idea to check them if you are concerned.

Ralph
 
Reply
Old Apr 1, 2007 | 01:34 AM
  #3  
Kev_n_AZ's Avatar
Kev_n_AZ
Thread Starter
|
Banned
Joined: Feb 2007
Posts: 2,619
Likes: 0
From:
Default RE: rockers chatter

ORIGINAL: Ralph78

Is it rocker lash or just "Diesel" noise?

It sure would be a good idea to check them if you are concerned.

Ralph

explain rocker lash.
perty much. when I let off the accelerator pedal, you hear the chatter from the engine. I can rev it up a bit, let off and it sings it chattery song.

 
Reply
Old Apr 1, 2007 | 02:03 PM
  #4  
jakebrake's Avatar
jakebrake
Champion
Joined: Feb 2006
Posts: 4,569
Likes: 0
From:
Default RE: rockers chatter

by your mileage, i would definatly check your valve lash. I believe it is .010 intake and .020 exhaust. When checking it check for the rockers to be pitted or the valve bridges. If they have been running loose there is a good chance a few will need replaced.
 
Reply
Old Apr 1, 2007 | 04:27 PM
  #5  
Kev_n_AZ's Avatar
Kev_n_AZ
Thread Starter
|
Banned
Joined: Feb 2007
Posts: 2,619
Likes: 0
From:
Default RE: rockers chatter

guessin Ill pick up 6 valve cover gaskets....and dig out my feeler guages.


thanks for the info.
 
Reply
Old May 1, 2007 | 05:00 PM
  #6  
Kev_n_AZ's Avatar
Kev_n_AZ
Thread Starter
|
Banned
Joined: Feb 2007
Posts: 2,619
Likes: 0
From:
Default RE: rockers chatter

well I dropped the $100 to have the valves adjusted.

watched an learned too!

no need for the tdc pin at all or any special tools!!

a ratchet on the alt pulley and turn the engine BACKWARDS slowly.....watching the valves open and close. then start at cyl's 1 and 2 and work your way around.


the rockers still chatter, but in unisen now!

idles better and accelerates smoother......



just gotta get the kickdown adjusted on the trans....[:@]
 
Reply
Old May 1, 2007 | 05:20 PM
  #7  
Drew's Avatar
Drew
Professional
Joined: Aug 2004
Posts: 117
Likes: 1
From: 33.43.342, 84.21.602
Default RE: rockers chatter

guess you'll be a pro at it now eh???
 
Reply
Old May 2, 2007 | 12:30 AM
  #8  
jakebrake's Avatar
jakebrake
Champion
Joined: Feb 2006
Posts: 4,569
Likes: 0
From:
Default RE: rockers chatter

After about 500x, you'll get the hang of it.
 
Reply
Old May 2, 2007 | 04:05 AM
  #9  
Kev_n_AZ's Avatar
Kev_n_AZ
Thread Starter
|
Banned
Joined: Feb 2007
Posts: 2,619
Likes: 0
From:
Default RE: rockers chatter

I may be learning the expensive way, but at least its not all guess work!
 
Reply
Old May 2, 2007 | 10:12 AM
  #10  
Drew's Avatar
Drew
Professional
Joined: Aug 2004
Posts: 117
Likes: 1
From: 33.43.342, 84.21.602
Default RE: rockers chatter

you might have. . .but remember, sometimes you have to pay for education.
 
Reply




All times are GMT -4. The time now is 05:47 PM.