Hey, Im new to this so dont mind my stupid questions. I bought an amsoil 4090 filter and wanted to make shure it will fit on my 06 5.9, if so does anyone have any installation tips or directions.


Thanks BEN

 

Welcome to the Forum, am sure some diesel guys/gals will chime in here with answers.....

 

I am still running stock. Sorry. but welcome to the forum

 

Welcome aboard! I am running the 4090 with pre-filter on my AEM Bruteforce intake tube. I don't think that it will work with the stock airbox.
Mike
###

 

Thanks for the replies, I didnt figure it would work in the air box, but can i take that off and just use the factory down tube. BEN

 

the factory tube won't work without adding a piece of 4" tubing to connect the stock section to the filter.
Mike
###

 

Thanks Mike, i just figured it would go on there if i wrestled it, because everone put the BHAF on the stock tube. Im glad i asked


Thanks, BEN

 

To get the BHAF filter on, I had to add a piece of 4" pipe and a 90° elbow. It was the first mod I messed with.A kind of crude first stab at an intake.
Mike
###


[IMG]local://upfiles/28306/678126AB4FF4465CB446E38B7B13A59E.jpg[/IMG]

 

Thanks, do you have any pictures of what it looks like now, and which down tube that i need?

 

OK here are a couple of pics
Mike
###

[IMG]local://upfiles/28306/3A9FCDD6C2434A9393E4B35F5677B5C3.jpg[/IMG]

[IMG]local://upfiles/28306/0B56D66DA21B4A24B6DE6FCA222D79C2.jpg[/IMG]