DRUM ROLL PLEASE
#1
DRUM ROLL PLEASE
after much frustration, and money to fix my ctd, I found a major problem and am 1/2 way through the fix for it.
breif.....replaced pcm, and crank sensor. went to Dodge and had mechanic run his ODB scanner on it. found a trans N safety switch code. he crawled bellow to look andtouched the harness causing an arc thus shutting down the engine. so, I brought it home to investigate possible miniscule nicked conductors.
OHH FRICKIN NO!!!!! [:@][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=shootshoot.gif]
the neutral safety switch conductors, and the OD wire harness conductors had degraded to bare copper over a foot into the wire harness on top of the trans.....
this crap fell to pieces in my hands when I touched it.
I have removed the 5 conductors from the harness to the trans. fabricated new harness for the N safety switch and OD connectors..
will post pics when I am done.
this is a short break
breif.....replaced pcm, and crank sensor. went to Dodge and had mechanic run his ODB scanner on it. found a trans N safety switch code. he crawled bellow to look andtouched the harness causing an arc thus shutting down the engine. so, I brought it home to investigate possible miniscule nicked conductors.
OHH FRICKIN NO!!!!! [:@][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=headbang.gif][sm=shootshoot.gif]
the neutral safety switch conductors, and the OD wire harness conductors had degraded to bare copper over a foot into the wire harness on top of the trans.....
this crap fell to pieces in my hands when I touched it.
I have removed the 5 conductors from the harness to the trans. fabricated new harness for the N safety switch and OD connectors..
will post pics when I am done.
this is a short break
#2
#3
#7
Trending Topics
#10
RE: DRUM ROLL PLEASE
ORIGINAL: Parts/Service
[sm=bounceybounce.gif] wish you had of found this before you spent all that money, but live and learn...
[sm=bounceybounce.gif] wish you had of found this before you spent all that money, but live and learn...
even installed that new crank sensor yesterday