Please help!!!!! 01 24valve cummins
Got a brand new starter just put it in today! jumped my truck cuz batteries were dead. It started up i drove it home and after an hr i went outside to start it to make sure my batteries were not dead and the key just turns everything on my dash works headlights i have everything lift punp eorks just no noise from my starter please help!!!!!
I got new batteries about 4-5 months ago i was told it could be my positive cables from my batteries so im going to replace them i just dont get it it will start just fine and then it wont but you can hear a ticking noise then it will start again sometimes it will grind to
All cables cleaned replaced my main positive from battery to the starter ($66 bucks at napa) still nothing... Wondering if it could be my ignition switch. Batteries were tested and they are 89% charged so there good but im stumped
Truck wont start ! Put in a new starter starts every now and then got batteries tested 89% each there good. Cleaned all grounds got new positive cable at napa ($66) put that in still nothing. You can hear a tick when i turn it over like the egnition switch hitting but the starter will not turn any advice?! The sensors are good as well
Trending Topics
Should i waste my time or just send it back? Its under warrenty so i might as well get a new one lol but if thats not it i have no idea what to do lol thanks for the reply! And jkeaton idk what you mean










