Vaders Dyno
#21
04-07-2004, 09:04 PM
Join Date: Dec 2003
Location: Death Star
Posts: 4,740
Likes: 0
Received 0 Likes
on
0 Posts
RE: Vaders Dyno
It was 100.00 for 1 hour, as many pulls as you can get in. 150.00 for tuning and dynos.
ORIGINAL: Ruslt
Hey Vader I have always wondered If you don't mind how much does it cost to have it dynoed?
Hey Vader I have always wondered If you don't mind how much does it cost to have it dynoed?
#22
04-07-2004, 09:07 PM
Join Date: Dec 2003
Location: Death Star
Posts: 4,740
Likes: 0
Received 0 Likes
on
0 Posts
RE: Vaders Dyno
No AFR plot, sorry, I will contact them to see if they saved one for me.
No headers yet
It seems the gain is low, so I am thinking of seeing if they will do it again for me.
No headers yet
It seems the gain is low, so I am thinking of seeing if they will do it again for me.
ORIGINAL: steve00ram360
Vader, did you by any chance get the AFR plot? if so, can you post it? you have the 5.9?
Is this w/the headers installed? Looks like they started the run late, was that the only one? the shop I go to will give 3 runs for $60, not bad and give any plot of data that he collects. (found a lazy O2 sensor that way).
the peak that is around 4400 rpm, is that the 8hp? Sorry for all the Q's but it is exciting when someone takes their ride to the dyno
A friend of mine just baselined his chevy before installing a set of ?gibson? headers which I think he put on last weekend (need to check), he should be ready to head back to the dyno...
-steve
Vader, did you by any chance get the AFR plot? if so, can you post it? you have the 5.9?
Is this w/the headers installed? Looks like they started the run late, was that the only one? the shop I go to will give 3 runs for $60, not bad and give any plot of data that he collects. (found a lazy O2 sensor that way).
the peak that is around 4400 rpm, is that the 8hp? Sorry for all the Q's but it is exciting when someone takes their ride to the dyno
A friend of mine just baselined his chevy before installing a set of ?gibson? headers which I think he put on last weekend (need to check), he should be ready to head back to the dyno...-steve
#28
04-08-2004, 11:07 AM
RE: Vaders Dyno
It's about the lightest one you can get I suppose, with a Hemi anyway, maybe around 5000#. The only mods so far are a K&N, removed resonator, and Mobil 1 synthetic. I'm scheduled for 9AM so the air should be good.
#30
04-08-2004, 07:10 PM
RE: Vaders Dyno
I have an Intake and Catback. Due to the QC weight with me in it, its more like a 30% loss. Guys at DTW have Stock 5.9's at 170 RWHP. 75 HP loss . I was dissappointed with the Superchip and have contacted them with my concerns. Hemi guys are getting 260 from a stock set-up. 85 HP loss. My goal is 250 at the rear wheels, w/o a supercharger. TB, Cam, gears, Headers should get me close though. Oh 5800lb with me in her.
Anyone have a heads up on if there is a supercharger for the Hemi? I have $5k for that upgrade and need to spend it before the wife finds out I have it....
Either way it has more pull then the Acura Integra I traded in.
Not too many Dyno's up here in Toronto.
Excellent pics and congrats on having such a cool family ran business down the road from you. (I'm jealous!!)