2000 Stratus Passenger Mirror Replacement Q's
#1
2000 Stratus Passenger Mirror Replacement Q's
Okay so my little sister tried to squeeze her car thru a tight spot and ended up tearing off her mirror. I've been looking online for replacement parts for the last hour and all of the power mirrors are also heated and I don't think hers are heated. If anyone has some answers regarding this I would really appreciate the help. Thanks.
#3
Okay so my little sister tried to squeeze her car thru a tight spot and ended up tearing off her mirror. I've been looking online for replacement parts for the last hour and all of the power mirrors are also heated and I don't think hers are heated. If anyone has some answers regarding this I would really appreciate the help. Thanks.
#5
Come to think of it, My '03 Town & Country doesn't show anywhere in/on the van that it has heated mirrors, but it's listed in the owners manual that they are standard with the trim level I have. They also run off the rear defroster switch...
I guess the only way to know for sure is to have a dealer run the VIN to see if they are a feature. Worse case, you get the e-bay heated ones, and just not plug in the wires for the heater.
#7
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,595
Likes: 0
Received 96 Likes
on
81 Posts
FRONT DOOR TRIM PANEL
REMOVAL
Disconnect battery
Open door.
Disconnect main wiring harness at door opening.
If equipped, remove window crank Window Crank
Disengage clips attaching speaker grille to trim panel Front Door Trim Panel
Remove screws attaching door trim panel to door from around speaker opening.
Remove screw cap from bottom of arm rest pull cup.
Remove screw attaching arm rest pull cup to support bracket behind trim panel.
Remove screw cap from behind inside door latch handle.
Remove screw attaching door latch handle to door panel.
Disengage clips holding trim panel to perimeter of door.
Lift trim panel upward to disengage upper retainer channel.
Tilt top of trim panel away from door.
Disengage clip holding latch linkage to back of release handle Linkage Clip
Remove door trim panel from vehicle.
INSTALLATION
Replace the clips attaching trim panel to perimeter of door.
Connect main harness at door opening.
Position door trim panel next to door.
Engage clip holding latch linkage to back of release handle.
Position door trim panel on vehicle.
Engage trim panel to upper retainer channel.
Engage clips holding trim panel to perimeter of door.
Install screw attaching door latch handle to door panel.
Install screw cap from behind inside door handle.
Install screw attaching arm rest pull cup to support bracket behind trim panel.
Install screw cap from bottom of arm rest pull cup.
Install screws attaching door trim panel to door from around speaker opening.
Engage clips attaching speaker grille to trim panel.
Install window crank handle, if so equipped.
Connect battery.
REMOVAL
Disconnect battery
Open door.
Disconnect main wiring harness at door opening.
If equipped, remove window crank Window Crank
Disengage clips attaching speaker grille to trim panel Front Door Trim Panel
Remove screws attaching door trim panel to door from around speaker opening.
Remove screw cap from bottom of arm rest pull cup.
Remove screw attaching arm rest pull cup to support bracket behind trim panel.
Remove screw cap from behind inside door latch handle.
Remove screw attaching door latch handle to door panel.
Disengage clips holding trim panel to perimeter of door.
Lift trim panel upward to disengage upper retainer channel.
Tilt top of trim panel away from door.
Disengage clip holding latch linkage to back of release handle Linkage Clip
Remove door trim panel from vehicle.
INSTALLATION
Replace the clips attaching trim panel to perimeter of door.
Connect main harness at door opening.
Position door trim panel next to door.
Engage clip holding latch linkage to back of release handle.
Position door trim panel on vehicle.
Engage trim panel to upper retainer channel.
Engage clips holding trim panel to perimeter of door.
Install screw attaching door latch handle to door panel.
Install screw cap from behind inside door handle.
Install screw attaching arm rest pull cup to support bracket behind trim panel.
Install screw cap from bottom of arm rest pull cup.
Install screws attaching door trim panel to door from around speaker opening.
Engage clips attaching speaker grille to trim panel.
Install window crank handle, if so equipped.
Connect battery.
Trending Topics
#10
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,595
Likes: 0
Received 96 Likes
on
81 Posts
SIDE VIEW MIRROR
REMOVAL
Remove side view mirror cover Side View Mirror Cover
Remove the door trim panel.
Disconnect power window mirror motor wire connector, if so equipped.
Disengage wire harness grommet from mirror flag, if so equipped.
Remove nuts attaching side view mirror to mirror flag Side View Mirror
Remove side view mirror from vehicle.
INSTALLATION
Feed power mirror wire harness through hole in mirror flag and seat grommet. Do not pull on wire harness to seat grommet.
Position side view mirror to vehicle.
Install nuts attaching side view mirror to mirror flag.
Engage push in fastener attaching power mirror wire connector to inner door panel, if so equipped.
Engage power mirror motor wire connector, if so equipped.
Install side view mirror cover.
REMOVAL
Remove side view mirror cover Side View Mirror Cover
Remove the door trim panel.
Disconnect power window mirror motor wire connector, if so equipped.
Disengage wire harness grommet from mirror flag, if so equipped.
Remove nuts attaching side view mirror to mirror flag Side View Mirror
Remove side view mirror from vehicle.
INSTALLATION
Feed power mirror wire harness through hole in mirror flag and seat grommet. Do not pull on wire harness to seat grommet.
Position side view mirror to vehicle.
Install nuts attaching side view mirror to mirror flag.
Engage push in fastener attaching power mirror wire connector to inner door panel, if so equipped.
Engage power mirror motor wire connector, if so equipped.
Install side view mirror cover.