625Hp Engine for 2007???
#1
625Hp Engine for 2007???
Chrysler has a majority ownership in a company called Ilmor. Ilmor produces V-10 racing engines for formula one and has been one of the instrumental forces in the design and building of the viper 8.3L V-10.
Recently they have begun producing boat engines and are now offering a NA 8.3L Viper block V-10 with an output of 625. The question is: why isn’t this engine, that is currently being mass produced and offered with a full warranty, being put in the coupe? Or is this the Gen IV surprise?
Check out their site
Power: 625 BHP @ 5,800 RPM
Torque: 600 ft lb @ 4,700 RPM
Full Throttle RPM Range: 5,400 - 6,000 RPM
Engine Configuration: 90 degree V10
Capacity: 505 ci (8.3 liters)
Bore & Stroke: 4.030 in / 3.960 in
Compression Ratio: 9.6 to 1
Fuel Requirement: 92 (R+M) / 2
Closed Cooling: Standard
Knock Control: Standard
Total Weight: 800 lbs*
*Dry weight including CMI Headers
-Matt-
Recently they have begun producing boat engines and are now offering a NA 8.3L Viper block V-10 with an output of 625. The question is: why isn’t this engine, that is currently being mass produced and offered with a full warranty, being put in the coupe? Or is this the Gen IV surprise?
Check out their site
Power: 625 BHP @ 5,800 RPM
Torque: 600 ft lb @ 4,700 RPM
Full Throttle RPM Range: 5,400 - 6,000 RPM
Engine Configuration: 90 degree V10
Capacity: 505 ci (8.3 liters)
Bore & Stroke: 4.030 in / 3.960 in
Compression Ratio: 9.6 to 1
Fuel Requirement: 92 (R+M) / 2
Closed Cooling: Standard
Knock Control: Standard
Total Weight: 800 lbs*
*Dry weight including CMI Headers
-Matt-
#6
#7
Trending Topics
#9