i just click the link and signed up no here is the problem i am haveing with my 03 2500 5.7 hemi i start the truck the idle jumps up and down but when i put it in to drive its fine it drives fine but when i put it back into park it starts all over again can anyone help and plus why is my pic not showing by my name

 

Hello Bill, welcome..
Are you throwing any codes? Sounds like it is hunting a little trying to adjust to maintain idle. Of course theses type of problems are hard to diagnose so start with checking vacum hoses and connectors, remove and clean the TB. Clean or replace air filter. Often cleaning the TB cures a hunting idle. As for your picture it has to be sized to fit the avitar location. With that said the signature is also size limited. If you have a photo bucket type account you can post pictures by pasting the "forum" address. Good luck...

 

ya its throwing a few codes p0113 p0132 p0300 but the check eng light dont stay on all the time sometimes it dont come on i have replace the o2 sensor map sensor plugs,wires and one of the coils

 

Bill,
The two following links will allow you to download the 03 service manual and the other is the list of codes.
Good luck..
https://dodgeforum.com/forum/3rd-gen-ram-faqs/258245-03-06-dr-service-manuals-for-download.html

https://dodgeforum.com/forum/3rd-gen-ram-faqs/240019-b-c-p-u-2004-2007-codes-in-full-details-from-alldata.html

 

Hey Guys been gone for a long time. My computer crashed and I was in between jobs and couldn't afford a new one. All is good now, back to work too much work actually, and back up on a new computer.

 

welcome back Cank, and billn457 change the PCV Valve too for good measure as it is often a forgotten item because of its strange screw in location on the manifold. Sounds like your fuel injectors need some cleaning. Not sure what you Guys down south use but just an additive run through a full tank of Gas is a start. Usually when I clean mine I can tell its working cause I get Multi misfire code during the cleaning phase.

Greg You never said if you liked the Pics of my new Hemi Grocery Getter in the lounge over yonder! I'm hopin to have registration in hand by next Fri.

 

Danny, I haven't been in the louge to see your truck. Anyway you know your truck is right with me. Hell one day I might even get you to drop that bad boy... lol

How is it running? I would really like to hear her spun up.

Edit: Danny the Magnum is one of my all time favorites, nice find.

 

Hell Greg I wanna lift it...LOL...But I do have a Vet knee!LOL...

 

Danny,If you have a specific need for ground clearance I am all for it, but you have a performance truck and they never get faster by being higher. Here is a 4wd truck that has certainly inspired many. http://www.cardomain.com/ride/229972...ab-omaha-ne-us Good luck.....

 

Ok Boys here we go. So I have the stock 20's on right now. My questions is : I am looking at the Cooper Discover STT, I either want the 33x12.5x20 or the 35x12.5x20. Now it says that recommended Rim width is 8.5-11.0 Now I believe the stock rims are 10.0 wide right ? so they should fit on the rim. But will a 12.5 clear the control arm in the back and also the wheel well ? If this wide of a tire will cause me to rub can I take care of it with a level kit. ( if I have to do a level kit im going with the 35's) Help an 03 brother out with some advice