V10 Club
Thread Starter
|
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Welcome.
Should be 13k 5th wheel, and 10k on the bumper hitch.
Should be 13k 5th wheel, and 10k on the bumper hitch.
Thread Starter
|
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Registered User
Joined: Jul 2014
Posts: 2
Likes: 0
That RB200 is not a dodge part. Rock Auto doesn't have it either. I've done nationwide searches for the part in bone yards against my better judgement because buying used auto electronic parts is like buying used light bulbs.
I finally took the ICM apart, got part numbers off the ICs and transistors, then rebuilt the part myself.
I finally took the ICM apart, got part numbers off the ICs and transistors, then rebuilt the part myself.
Professional
Joined: Dec 2014
Posts: 153
Likes: 0
From: MN
I'll only be a member of the V-10 club for another week or so, when she finds a new home.
'95 extended cab w/8' box, 4x4.
My dad bought it new in '95, and it was our plow truck from '98 until 2011, when my dad bought an '09 D2500 5.7 Hemi quad cab
I bought the '95 and have used it for plowing and hauling duty.
But I just picked up an '09 D1500 4x4, and my dad picked up a '12 Journey, so the plow stays on his '09 all winter.
But it's been a great truck, with few problems over it's life so far.
'95 extended cab w/8' box, 4x4.
My dad bought it new in '95, and it was our plow truck from '98 until 2011, when my dad bought an '09 D2500 5.7 Hemi quad cab
I bought the '95 and have used it for plowing and hauling duty.
But I just picked up an '09 D1500 4x4, and my dad picked up a '12 Journey, so the plow stays on his '09 all winter.
But it's been a great truck, with few problems over it's life so far.
So what mods work best with the V10's? I tried searching the gen 2 forum but both v10 and 8.0 are too generic and most searches on parts or mods are for the v8 guys.
My truck is box stock so far. I have 3.55's and the first change will be to 4.10's, but what else works for these motors? Will hemifever's tuner be worth investing in?
My truck is box stock so far. I have 3.55's and the first change will be to 4.10's, but what else works for these motors? Will hemifever's tuner be worth investing in?
Enjoy
