When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry about son's accident. Hopefully he wasn't hurt. I am looking for a "Height Sensing Brake Valve" for my 2500. Per Dodge this is a discontinued item. I'd like to keep my truck as stock as possible and would rather replace this piece than alter the rear braking system. I just need the valve body. My linkage to control it is still good. Please feel free to contact me at this email address. Thanks, David ***
I haven't pulled anything off except the bent up sheet steel.
5.9 V8 automatic 4x4 with 4.10 Dana 60.
Transmission tailshaft is broken.
Tranfercase looks ok.
Engine escaped damage, and ran good.
Front diff housing may be twisted
Good front axles with a new left stub axle and ujoints
Has a really nice SLT seat from a 1999.
Rust free right fender
Rust free right door.
New dual exhaust with stainless muffler and 2.5" aluminized tail pipes that exit under rear bumper.
New monroe rear shocks.
Good front brakes, new calipers and
Nice overhead console
Nice glovebox and drink holder
Was keeping it for parts because I wanted to get another one of these, but a good candidate proved too hard to find and I ended up buying a 3rd gen as a replacement.
Sorry about son's accident. Hopefully he wasn't hurt. I am looking for a "Height Sensing Brake Valve" for my 2500. Per Dodge this is a discontinued item. I'd like to keep my truck as stock as possible and would rather replace this piece than alter the rear braking system. I just need the valve body. My linkage to control it is still good. Please feel free to contact me at this email address. Thanks, David ***
I think there was a TSB about those valves, and dodge recommended bypassing them....... May wanna check in to that.
Sorry about son's accident. Hopefully he wasn't hurt. I am looking for a "Height Sensing Brake Valve" for my 2500. Per Dodge this is a discontinued item. I'd like to keep my truck as stock as possible and would rather replace this piece than alter the rear braking system. I just need the valve body. My linkage to control it is still good. Please feel free to contact me at this email address. Thanks, David ***
Thanks David, I just stuck the label on the box - on its way. Thanks!
Could you give me some information about the engine? IE: mileage, etc. and how much you would take for it? If you prefer you can pm me about it.
Thanks
SOLD update:
Engine
Starter
Sill plates
Rear height proportioning valve
Lots of good stuff left, got the door open - I grabbed a shot of the seat. I pulled it out of a SLT 99 standard cab, and had a local guy use original OE material to rebuild the lower cover and foam. The donor was a one owner, I don't think the passenger side was ever sat in. The white stuff is just SNOW !
Behind the inner door panel (drivers side), around the door handle is a black shield (hides the door paint color).
I’ll take it if available.
Advise on price and postage to 33444
Parting out 2000 Dodge Ram 2500 4x4 Std cab
