Dodge Caliber 2010 central locking not working
#1
Dodge Caliber 2010 central locking not working
suddenly its not opened and not working for now
also room lamps not working and light where transmission handle is - P R D N
I have checked all fuses and contacts - remote works but also not close/open locks, buttons on the door also not working
also room lamps not working and light where transmission handle is - P R D N
I have checked all fuses and contacts - remote works but also not close/open locks, buttons on the door also not working
#4
I read online that a "shock" from static can reset your key fob, and you have to go to the dealership to set them, however have you tried disconnecting the battery for 10mins and then trying the locks?
#5
already tried disconnect battery and erase all faults by scanner - nothing. My key fob is forking, its ok, but locks not working not from key fob, not from buttons on the doors. All modules doesn`t have faults - only gateway - right beam lamp is off. Door and passenger door module not response.
#6
idk about your headlamp but have you taken the interior panel off and disconnected the power switch modules and then re-plug them in? the interious panel is generally held together by 5-8 plastic clips, I haven't personally taken my cars interior panel off so im not sure how many clips there are, but maybe the modules that control the locks have come loose in the door or the linkage in the has but probably not the linkage if you can lock & unlock manually just the electronic modules
#7
Trending Topics
#8
already tried disconnect battery and erase all faults by scanner - nothing. My key fob is forking, its ok, but locks not working not from key fob, not from buttons on the doors. All modules doesn`t have faults - only gateway - right beam lamp is off. Door and passenger door module not response.
TIPM FUSE NUMBER 10 OPEN
(P33) DOOR LOCK DRIVER WIRE OPEN
(A932) FUSED B+ CIRCUIT OPEN
INSTRUMENT CLUSTER
__________________
Regina
U.S. Top Care
FCA U.S. LLC