Finaly have the time and money to work on my car..need advice! !
#1
Finaly have the time and money to work on my car..need advice! !
Hello everyone.
I posted here a long time ago asking what i could do to make my car preform better and faster
At first i knew nothing about cars ... but over the last few months i've learned alot
So i have decided to save up some cash and work on my car
now i have 1200$
and a dodge avenger es in my garage
aside from a messed up fuel pump... which i will be replacing today ...nothing is wrong with the car
the main things i want to look at are cold air intake's and headers for the first upgrades
but here is the problem ...i can not find any headers for this car!! where can i find them?
and can any 1 tell me the correct area of increase in power from a good cold air intake and headers?
i've been told anywear from 24 hp for both ..all the way up to 100hp
I posted here a long time ago asking what i could do to make my car preform better and faster
At first i knew nothing about cars ... but over the last few months i've learned alot
So i have decided to save up some cash and work on my car
now i have 1200$
and a dodge avenger es in my garage
aside from a messed up fuel pump... which i will be replacing today ...nothing is wrong with the car
the main things i want to look at are cold air intake's and headers for the first upgrades
but here is the problem ...i can not find any headers for this car!! where can i find them?
and can any 1 tell me the correct area of increase in power from a good cold air intake and headers?
i've been told anywear from 24 hp for both ..all the way up to 100hp
#4
RE: Finaly have the time and money to work on my car..need advice! !
there was only one company that made headers ... XIR there was a group buy years ago ... they have been seen on ebay but due to the limited# they bring three times what they were new ... There was a set on one of the other avenger sites for $500
Iceman /AEM both make good cold air intakes ... I prefer the AEM with the bypass valve if you are in a rainy area
Iceman /AEM both make good cold air intakes ... I prefer the AEM with the bypass valve if you are in a rainy area
#5
#6
RE: Finaly have the time and money to work on my car..need advice! !
headers=25hp ... lots more torque...
underdrive pulley=10hp
icon ignition=8/10hp
there is no direct bolt in supercharger .... only one turbo set up but the shop isn't shipping and not communicating so I'd not recomend them ....
nitrous can be used up to 100horse shot
underdrive pulley=10hp
icon ignition=8/10hp
there is no direct bolt in supercharger .... only one turbo set up but the shop isn't shipping and not communicating so I'd not recomend them ....
nitrous can be used up to 100horse shot
#7
RE: Finaly have the time and money to work on my car..need advice! !
header's i cant find
under pully.. i couldent do that lol
what is icon ignition thow?
and there is no direct bolt in supercharger? and the turbo company cant be contacted ? man that hole msg bummed me down
[align=center] [/align]
under pully.. i couldent do that lol
what is icon ignition thow?
and there is no direct bolt in supercharger? and the turbo company cant be contacted ? man that hole msg bummed me down
[align=center] [/align]
Trending Topics
#8
RE: Finaly have the time and money to work on my car..need advice! !
There is a set of headers on another avenger site , for $500 includes downpipes ...
Underdrive pulley = bolt on and change belts ...pretty easy hp gain
ICON is made by superchips , it's an ignition modifier definately helps by djusting timing ect be sure to get the programming cable ect to allow extra tuning ..
NO direct bolt supercharger the Ripp Mods one has been used with the 3.0 motor swap ...
Exile Racing was the turbo supplier ...
Underdrive pulley = bolt on and change belts ...pretty easy hp gain
ICON is made by superchips , it's an ignition modifier definately helps by djusting timing ect be sure to get the programming cable ect to allow extra tuning ..
NO direct bolt supercharger the Ripp Mods one has been used with the 3.0 motor swap ...
Exile Racing was the turbo supplier ...
#10
RE: Finaly have the time and money to work on my car..need advice! !
So i have decided the first two thing i will do
is
1. put a cold air intake on the car.
2.exsaust...but i know close to nothing pipes or mufflers .. just that i do not want my car to sound like a civic with that cracking noise .. its so horrible
my question for you fellow avenger owners and fans is... what would you suggest for best increase in performance with these items?
is
1. put a cold air intake on the car.
2.exsaust...but i know close to nothing pipes or mufflers .. just that i do not want my car to sound like a civic with that cracking noise .. its so horrible
my question for you fellow avenger owners and fans is... what would you suggest for best increase in performance with these items?