help with new air filter
#4
Lots of places. www.summitracing.com www.jegs.com www.ebay.com
Here is my K&N air filter system with the X-Stream filter top.
Here is my K&N air filter system with the X-Stream filter top.
#5
#6
Originally Posted by jdosegueda
hey
i was wondering where you got your air filter system i cant seem to find one for a 91 only for 91 but would a 92 fit on my 91 dakota?
i was wondering where you got your air filter system i cant seem to find one for a 91 only for 91 but would a 92 fit on my 91 dakota?
I don't know if it will work on a 91, I got a 93. Post up pictures of your stock air filer and with it removed.
#7
Trending Topics
#10
K&N Plenums & Weber Adapter
CUSTOM PLENUM
Cast aluminum plenum, beautifully finished with black powder coating and natural aluminum highlights. The plenum is designed to fit most American 4 barrel carb that have a 5-1/8" flange. Also will fit the Weber DGV carburetor when used with K&N adapter 85-1061. Designed for cold air intake, plenum has a single snorkel outlet that can be fitted with a 4" I.D. hose running to a remote air filter. A K&N universal filter with a 4" flange can also be clamped directly on the snorkel as well. See the Universal pages for filters that will fit onto the inlet. The outside diameter of the plenum is 9" and the snorkel sticks out 6" from the center of the plenum. Minimum clearance required above the carburetor flange is 3-1/8". Customer must provide 1/4"-20 hold down stud.
CUSTOM PLENUM
Cast aluminum plenum, beautifully finished with black powder coating and natural aluminum highlights. The plenum is designed to fit most American 4 barrel carb that have a 5-1/8" flange. Also will fit the Weber DGV carburetor when used with K&N adapter 85-1061. Designed for cold air intake, plenum has a single snorkel outlet that can be fitted with a 4" I.D. hose running to a remote air filter. A K&N universal filter with a 4" flange can also be clamped directly on the snorkel as well. See the Universal pages for filters that will fit onto the inlet. The outside diameter of the plenum is 9" and the snorkel sticks out 6" from the center of the plenum. Minimum clearance required above the carburetor flange is 3-1/8". Customer must provide 1/4"-20 hold down stud.