When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am wondering if anyone has used the brand ultra power o2 sensors in there Dakotas? I have a 96 Dakota with the 3.9 in it and need to replace my o2's. Are the ultra power o2 sensors decent or are they garbage? Thanks In advanced. Justin
Big_Texxan may be the exception. In most cases, the other brands work more reliably than Bosch. just sayin'...
Yeah Ive heard that many times. I did have a problem with them when I installed, it was during the winter, and I built the truck to run cold, so nothing ever really got warm enough, and it kept throwing the heater code on the 02. But it hasnt had a problem since.
Originally Posted by T-Ram
I put Bosch in everything no problems ever so far-is there a write up on Bosch issues anywhere?
I like Bosch, except for the spark plugs. I got a bad Ping when I had them, I run NGK and by far the best for our trucks.
Originally Posted by Jud980
Thanks for the input everyone. I think I might break down and put 2 new denso o2 sensors in it and give them a shot.
Well I just called the parts store and it looks like I'll be giving Bosch a shot. It's all they have on stock and I don't feel like special ordering the denso ones. From what I've read so far denso is better but I'll give Bosch a try since that's all they carry. They only need to last a year because I'm going to be dropping a Chrysler 360 down in it this winter. Thank you again everyone on the input.