So what are you doing?
#12
#14
Going to work might be shut down for me, but there's plenty to do around my place. Never ending cleaning up the shop/yard. Getting Buick prepped for auction on BaT. Lifting the two tone Dak and putting a pile of parts in it that have been waiting for me to get to them. Deleting the diesel X5. Boat all cleaned up and had the family out once so far, hope to get more fishing time with my son. Spending lots of time with my kids while my wife works from home. Overall I'm actually kind of enjoying this mess of a situation.
#15
Join Date: May 2012
Location: Middle of Freakin' Maine!
Posts: 69
Likes: 0
Received 5 Likes
on
4 Posts
I started on my wiring mess for the radio yesterday... naturally, last guy to "install" just ripped out the factory plugs and twisted the wires together and sealed it with electrical tape... fraggin' pro job... so anyways I call up autozone and ask them about a wiring connection hoping that would be the plugs that were ripped out... End up being the plugs I already got with the install kit from crutchfield, so I had to professionally hack my wiring harness in there. Even better, he burnt out my constant 12v wire so I'm just gonna do the right thing and run a two-wire up to the battery. Girlfriend was getting on me yesterday about cutting some video, but in all honesty, running to the parts store 80 times to watch me cuss and swear and undo someones hackjob into my own "professional" hackjob would have been terribly ****ty content IMO.
Right now, I'm just gonna drink my cup of coffee and think about the best way to get a transmission, transfer case, and rear end pulled from the back field without getting myself injured. I just tried posting this entire thing without logging in first, so I can already tell this day is going to go well
pics of the insolence. I guess they could be salvaged if I had new pins to insert into the clips but I already had a pack of butt connections so I figure why the hell not right?
Right now, I'm just gonna drink my cup of coffee and think about the best way to get a transmission, transfer case, and rear end pulled from the back field without getting myself injured. I just tried posting this entire thing without logging in first, so I can already tell this day is going to go well
pics of the insolence. I guess they could be salvaged if I had new pins to insert into the clips but I already had a pack of butt connections so I figure why the hell not right?
Last edited by Bryce V. Fowler; 04-17-2020 at 09:06 AM.
#17
I started on my wiring mess for the radio yesterday... naturally, last guy to "install" just ripped out the factory plugs and twisted the wires together and sealed it with electrical tape... fraggin' pro job... so anyways I call up autozone and ask them about a wiring connection hoping that would be the plugs that were ripped out... End up being the plugs I already got with the install kit from crutchfield, so I had to professionally hack my wiring harness in there. Even better, he burnt out my constant 12v wire so I'm just gonna do the right thing and run a two-wire up to the battery. Girlfriend was getting on me yesterday about cutting some video, but in all honesty, running to the parts store 80 times to watch me cuss and swear and undo someones hackjob into my own "professional" hackjob would have been terribly ****ty content IMO.
Right now, I'm just gonna drink my cup of coffee and think about the best way to get a transmission, transfer case, and rear end pulled from the back field without getting myself injured. I just tried posting this entire thing without logging in first, so I can already tell this day is going to go well
pics of the insolence. I guess they could be salvaged if I had new pins to insert into the clips but I already had a pack of butt connections so I figure why the hell not right?
Right now, I'm just gonna drink my cup of coffee and think about the best way to get a transmission, transfer case, and rear end pulled from the back field without getting myself injured. I just tried posting this entire thing without logging in first, so I can already tell this day is going to go well
pics of the insolence. I guess they could be salvaged if I had new pins to insert into the clips but I already had a pack of butt connections so I figure why the hell not right?
You are dealing with one of my pet peeves. I have a Cadillac Escalade that the previous owner put a "system" into. When he swapped it for my BMW, he hacked most of it out and slapped a cheapo radio that only played bluetooth. When I went to put a decent radio in it, I found he had whacked the wires off way back in the dash where my thick arms can hardly get to. Yours especially is annoying at Mopar radios from the late 80's to 2001 use the same mounting and connectors. At work, we used to wire up Mopar radios to our lift trucks to have music. We replace the trucks every three years. The aftermarket radios wouldn't last a year due to vibration and dust. Before I came off loading and didn't have my own truck anymore, I had one Mopar radio last three generations of trucks.
To anyone wanting to put a "system" in their car or truck. GET THE CHEAP ADAPTOR KIT!!!
The following users liked this post:
RalphP (04-17-2020)
#18
*sees Bryce V. Fowler's pictures, walks outside, slams head against brick wall to sooth the pain*
See, now, that's a highmark of a previous owner being an idiot, and a jackass.
I'd be SEVERELY worried about any other "repairs" or "upgrades" they had done, too.
BTW - If you want, you CAN buy new vehicle ends from Metra and/or Scosche; I have a pair tied to the radio ends as an extension around here somewhere, so I can play with a radio without having to reach so far in ...
But yes.
Anyone else reading - BUY THE DAMN KITS. Don't butcher that poor truck to save $10 or less.
RwP
See, now, that's a highmark of a previous owner being an idiot, and a jackass.
I'd be SEVERELY worried about any other "repairs" or "upgrades" they had done, too.
BTW - If you want, you CAN buy new vehicle ends from Metra and/or Scosche; I have a pair tied to the radio ends as an extension around here somewhere, so I can play with a radio without having to reach so far in ...
But yes.
Anyone else reading - BUY THE DAMN KITS. Don't butcher that poor truck to save $10 or less.
RwP
#19
Ran across this in my email, thought others might be interested.
https://raybuck.com/how-to-reuuphols...k-bench-seats/
RwP
https://raybuck.com/how-to-reuuphols...k-bench-seats/
RwP
The following users liked this post:
buick (04-17-2020)