4.7 cranks but no start
#1
4.7 cranks but no start
alright so i just did a head gasket replacement on my durango i have put everything back together except for the radiator is not in and i have no coolant in the motor.
the 4.7 was running before i pulled it apart and when i crank it, it sounds fine but it will not start. i have tried spraying ether in the intake i hear the fuel pump turning on. all of my grounds on the block and heads are on good. i have not replaced the crank or cam sensor only because i would like to rule out every other possibility first.
my biggest question is, does the radiator being off and no coolant being in the motor have anything to do with it? i have hoses coming in the mail thats the only reason i havnt put the radiator on yet but if this is the cause of it that would be great honestly.
the 4.7 was running before i pulled it apart and when i crank it, it sounds fine but it will not start. i have tried spraying ether in the intake i hear the fuel pump turning on. all of my grounds on the block and heads are on good. i have not replaced the crank or cam sensor only because i would like to rule out every other possibility first.
my biggest question is, does the radiator being off and no coolant being in the motor have anything to do with it? i have hoses coming in the mail thats the only reason i havnt put the radiator on yet but if this is the cause of it that would be great honestly.
#2
#3
#5
#7
Trending Topics
#8
#9