ill take the koni's, springs, and the sway bars plz!

seriously though, i want a video when you race this guy.

and another question, sorry, those prothane's you have...are those for the shifter or suspension? im looking for a good brand to buy for the shifter bushings, let me know! id like to hear first-hand how well they work.

- Zach

 

i have booger bushings for the shifter......prothane motor mount inserts.....prothane suspension bushings....
since the car isnt running yet, im not sure how the shifter bushings will work...but while moving the shifter it alredy feels alot stiffer

 

noice. ill look into some, ive heard they do wonders.

 

my work car had booger bushings in it when i bought it...as well as the prothane suspension bushings....
everything was nice and tight.....
though it was kinda a pain in the *** to put everything in the r/t....not so much my boogers, but the suspension bushings....those were a pain[&:]

 

Marsh712 you definatly need to get Boogers. They are probably the greatest thing for the MTX Neon. IMO lol

 

haha ok. it's not entirely too difficult to change the shifter busings is it?

 

Nope not at all. For the ones on the shifter just pop them out with a flathead screwdriver and the ones on teh tranny just use two flatheads on each side to pull the whole shifter cable up and then pop them out with your fingers. Might take 10 minutes tops. Worst part is gettin the battery and tray out (which I guess you dont even have to really).

 

i should be able to work from underneath on the tranny and feel around. ive got that header in so alot of space is freed up. (cai helps too)

 

very true!

 

i didnt read all the post but to answer the originl question yes it is possible as long as its built right and with the correct parts.