srt4 head swap on a 97 sohc!?
#3
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
my biggest concern is the electrical. i havent done it yet im just doing some research on it. i didnt want to do the srt swap cause i dont have the money nor the time. i bought the howell automotive book and read that the srt head swaps over fairly simple and im wondering if any one else has done it.
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Stick to the 1G dohc head. Stock for stock the 1G head has a larger exhaust side than the srt dohc head. You'd think the srt head would be the best performing out of the box, but this is incorrect. In fact, many srt owners use the exahaust cam from a 1G dohc neon as an upgrade. Has greater lift and duration, which is ideal for a turbo car. The exhaust vavles on a 1G dohc head are also larger than that of the srt, allowing it to flow more air. The 1G head can be had at most salvage yards for under $45. Cams may be extra.
#7
Trending Topics
#8
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
so if the 1st gen DOHC head flows better if and when i do a 2.4 swap are you saying i want to swap the whole 2.0 head onto the 2.4 cause it flows better? i know i deff would be swaping the cams from my current engine and remove the balance shafts as well... but the whole head also that would be pretty cool yet another mod that would add even more power to the stock 2.4 swap...
#9
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
for some reason i was thinking the head on the 2.4 is the same as the one on the 2.0 (same cast #).
reading is good
https://dodgeforum.com/forum/1st-gen...c-to-dohc.html
reading is good
https://dodgeforum.com/forum/1st-gen...c-to-dohc.html
#10