1998 dohc rebuild
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Hey guys I have a 1998 2.0 neon dohc with 5spd that I'm wanting to rebuild and mod.
Looking for ideas as to what i should but for cam. pistons. rods all that kinda stuff to get the most out of it. I'm also looking to port and polish head or swap. not sure if need to do turbo.
Looking for ideas as to what i should but for cam. pistons. rods all that kinda stuff to get the most out of it. I'm also looking to port and polish head or swap. not sure if need to do turbo.
#2
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
What's your overall goal and budget? That will have a lot to say about what you do to it.
Take a look at these nice kits...
http://www.modernperformance.com/eng...0_397_511.html
Take a look at these nice kits...
http://www.modernperformance.com/eng...0_397_511.html
#3
#4
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
To get to 250 whp, you either need a turbo or nitrous or seriously mod the engine to stay N/A. The turbo would be the quicker way than N/A, so we will go with that build. You would need to build the block to handle the power, so eagle rods with forged pistons. If you port and polish the head, you should to the same to the intake manifold and port match everything. 60mm TB, 2.5" or 3" exhaust piping, upgraded cams and so on.
You could just build a stock DOHC engine with the turbo and get close to 250 whp. The above recommendations, would get you past the 250 mark. Hahn Racecraft makes a very nice turbo kit for the Neon as has been proven over and over again. You could also build your own turbo kit, by using the SRT4 turbo and manifold. It bolts right up to the DOHC head. You would just have to build the kit yourself, but it isn't very difficult. Intercooler piping from ebay, and a used SRT4 intercooler, some fittings and so on.
You could just build a stock DOHC engine with the turbo and get close to 250 whp. The above recommendations, would get you past the 250 mark. Hahn Racecraft makes a very nice turbo kit for the Neon as has been proven over and over again. You could also build your own turbo kit, by using the SRT4 turbo and manifold. It bolts right up to the DOHC head. You would just have to build the kit yourself, but it isn't very difficult. Intercooler piping from ebay, and a used SRT4 intercooler, some fittings and so on.
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
so as to what kinda pistons should i use? i'm looking to bore it out some maybe .20 over. any sugestions as to rods and what kinda cams i should use? i am going to port and polish the head. how much should i get shaved off the head also?. and going to polish the intake. put on different header what kind is good. also going to get mopar pcm/ecu
#6
#7
Trending Topics
#8