just put my intercooler up to my front and it looks like i have to cut into my front bumper support to get it to fit the way i want it to....and i dont want to do that... so does anyone know an intercooler that will fit just right under the front bumper support or any good specs for one? or should i just get an srt intercooler?

 

nevermind......found the perfect one!

 

eitherway you should have to do some cutting....i needed to cut alot for the srt intercooler to fit



[IMG]local://upfiles/29901/616E5DFF438B4ED0A759FE7731FB0925.jpg[/IMG]

 

damm[:@]i thought it would fit under the front bumper support without having to cut. hey are the specs for the intercooler i posted about the same as your srt4 intercooler? and what did you have to use to cut?

 

the specsshould be about the same.....
and you will need an intercooler that has the inlet and outlet comming out the back.....if you get one that has them in the side, you wont be able to route the piping....

about 15 minuites with a sawzall and it was just how i needed it.....and you do have to cut decent sized chunk out of each side of the raiator support

 

the inlet and outlets come out on the side of the intercooler i have now..i cant use those little bent rubber pieces to route the piping to the back?

 

just cut the support! you want funcionallity or gofast parts? lol. i figure, if i wreck my neon it will be from some other idiot, and i will end up going to jail for kicking his butt.

 

you might be able to use the elbows to route it.....but you will have to do a hell of alot of extra cutting and drilling
crawl underneath the front of your car and look up under the radiator......you will see all the drap that you will have to cut....in order to use a side outlet/inlet intercooer, you will have to go through some major front end supports

 

ok kool, well i guess i should start lookin for a srt4 intercooler then....[&:]

 

srtforums.com

put up a wanted post....and give it a day