Coolant leak
#1
Coolant leak
Hey
i have a coolant leak thats coming inside my cab from the black air box(dont know the name) i was wondering how i take it out, i took out the screws form the top through the glove box but wont come out(third and fourth pics) my haynes repair doesnt have any thing on it any help would be awesome.
thanks
i have a coolant leak thats coming inside my cab from the black air box(dont know the name) i was wondering how i take it out, i took out the screws form the top through the glove box but wont come out(third and fourth pics) my haynes repair doesnt have any thing on it any help would be awesome.
thanks
#4
i am think you have to take the whole dash out.
Fig. 17 Heater assembly. Ramcharger, Trail Duster & Conventional Cabs less A/C. 1981-84 shown, 1985-87 similar
1981-87 Models
Fig. 17 Heater assembly. Ramcharger, Trail Duster & Conventional Cabs less A/C. 1981-84 shown, 1985-87 similar
1981-87 Models
- Disconnect battery ground cable.
- Disconnect heater hoses on engine side and plug heater outlets.
- Remove right side cowl trim if so equipped.
- Remove glove box, then structural brace through glove box opening.
- Remove right half of instrument panel lower reinforcement, making sure to disconnect ground strap.
- Disconnect control cables, then blower motor wires on engine side.
- Disconnect wires from resistor block.
- Remove screw holding heater to cowl side sheet metal.
- Remove 6 heater retaining nuts on firewall, then remove heater.
- Remove mode door crank and 15 screws to remove cover from housing, then slide heater core out.
- Reverse procedure to install.
#7