2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

PLEASE HELP , Im stumped

Thread Tools
 
Search this Thread
 
  #1  
Old 03-07-2008, 06:35 PM
cjwilliams72's Avatar
cjwilliams72
cjwilliams72 is offline
Thread Starter
Join Date: Mar 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default PLEASE HELP , Im stumped

on a 97 dakota sport with a 4cycle 5 speed tran . The gauges all stopped working,, and the shift light check engine light and anything else that lights up when the key is engaged to start position is on all the time ,,when i shut it off the gas gage will go up andshow the amount of gas, the oil gage will shot up for a second and the same with the other gauges,, I have checked every fuse in the vehicle that i could find and nothing wrong ,, with the battery disconnected i have unplug ever sensor and wire i could find and replug them back in to make sure all conections where good and still nothing..

i have since searched the internet and also have came up with nothing ,, someone please help
 
  #2  
Old 03-07-2008, 07:19 PM
batman13's Avatar
batman13
batman13 is offline
Grand Champion
Join Date: Feb 2006
Location: N.Ridgeville, OH
Posts: 5,597
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

check the wiring behind the gauge cluster.
theres a module that might've gone bad also, i forget what its called though....
 
  #3  
Old 03-07-2008, 08:02 PM
cjwilliams72's Avatar
cjwilliams72
cjwilliams72 is offline
Thread Starter
Join Date: Mar 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

batman a module ive ask every place possible <Please tell me more about module and where can i get one
 
  #4  
Old 03-07-2008, 08:18 PM
batman13's Avatar
batman13
batman13 is offline
Grand Champion
Join Date: Feb 2006
Location: N.Ridgeville, OH
Posts: 5,597
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

i don't know what its called, i've never had a problem,
but it's most likely a dealer item.
can you get a code scan?
 
  #5  
Old 03-07-2008, 11:05 PM
cjwilliams72's Avatar
cjwilliams72
cjwilliams72 is offline
Thread Starter
Join Date: Mar 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

the problem with a code scan is i can't drive the truck ,, its not taged and insured yet.
 
  #6  
Old 03-08-2008, 03:15 PM
moe7404's Avatar
moe7404
moe7404 is offline
Record Breaker
Join Date: Jul 2007
Location:
Posts: 2,040
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped


moe in wichita ks
years ago mopars had a voltage reg that pluged into the dash panel, it made 5 vlots to run the gauges. it was cheeply made and would stick close which would run the gauges to full scale or it would stay open causing the gauges to show nothing. they are easy to replace, it just plugs into the circuit board. i dont know when they stoped using them, if they did.
 
  #7  
Old 03-08-2008, 04:42 PM
cjwilliams72's Avatar
cjwilliams72
cjwilliams72 is offline
Thread Starter
Join Date: Mar 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

thanks moe...i'll check that out
 
  #8  
Old 03-10-2008, 06:22 PM
cjwilliams72's Avatar
cjwilliams72
cjwilliams72 is offline
Thread Starter
Join Date: Mar 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

its hard to beleive know body knows what is causeing my gauges not to work
 
  #9  
Old 03-12-2008, 08:27 PM
buyalosg's Avatar
buyalosg
buyalosg is offline
Join Date: Mar 2008
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default RE: PLEASE HELP , Im stumped

Afraid I can't help, but we have what sounds like the same problem with a '99 V6 Dakota Sport.About a week ago,when my husband started the truck all of the idiot lights came on and nothing on the instrument panel worked.Sounds exactly as you described it. He took it to a dodge dealer and they wanted $1000 to fix it - they said the instrument panel would have to be replaced. That's just too much, so he took the panel out and took it to a shop that said they might be able to repair it. But they said they couldn't get it to "fail"... whatever that means. So then he went to a junkyard that had a used instrument panel and tried that. No joy. So he's driving it as is for now... with all the idiot lights on and no speedometer or gas gauge or anything else working.

If youfind a solution, I'd love to hear it!

Thanks.

Gail B
 



Quick Reply: PLEASE HELP , Im stumped



All times are GMT -4. The time now is 07:55 PM.