Well the installation is simple. You screw two steel mounting brackets to the housing, for the bottom inside and top outside holes. Mount the lights up and done. You will probably have to use a 10mm wrench to reach the top outside screws.

As far as pictures, its been too cold to get a car wash but I can take some with a dirty car if you'd like.

 

That would be fine I just want to see how they look.

 

Alright, I'll get some of mine up in the next four hours.

 

Ok Thanks.

 

So I got hit with a nice little headache last night which means I didnt get around to taking any pictures, by the time I woke up it was dark so I just started to play Assassins Creed 3. However, I WILL get some pictures put up eventually.

 

Since I am at work I can't post a direct image code but I put these clear lens ones in with Silverstar Ultras and it is a lot better than stock. Nothing beats the HID's in my TSX though so I still feel the ones in the Dakota blow.
2011-07-06_20-27-50_110.jpg