remote starter not workin right
#22
#23
RE: remote starter not workin right
It should be right there, seriously. I was just under mine the other night wiring up a wideband, and it's there, like I said, unless your truck is a 2001, or some midway change over or something? How are you testing wires? Do you have a test light? stick your light or meter in that yellow wire you've got and crank the truck, if it lights up then it's gotta be it, but that's wierd
#24
RE: remote starter not workin right
well it was made in march 00. The yellow wire does connects to position 7 on the ignition control switch. I probed it and it's (-) all the time and it's (+) during crank. There must be a blue/yellow wire since it's not cranking :\ . And also, in my repair manual...under teh ignition diagram for 2000 models, it says there is a blue/yellow wire. Drivin me nuts.
#25
#26
RE: remote starter not workin right
Yeah up through 96 is a yellow starter wire, 97-00 is blue/yellow, then 01-up is yellow again. Also though, Bulldog starters will NOT crank if there is a wire such as the parking lights not hooked up, (for fire safety issues)so make sure you don't have extra wires that arent hooked up to anything. It's stupid, I hate Bulldog. But that may be the reason. And to make sure of the year of the truck, the best way is to look at the sticker under the hood, it's a white sticker with Catalyst information on it, near the bottom it will say something like "complies to 2000 model year" or 2001, ect That's a sure way to tell the year.
#29