Alright...I hook up all the wires, and when it's time to try it...I press teh button and then my parking lights flash and the module ticks 3 times. Here's what I got goin on:

Black/Orange = accessory 1
Dark Blue = Ignition 1
Black/White = Ignition 2
Pink/Black = +12V Constant
Yellow = Starter

At the kick panel..

Light Green/Orange = Factory Alarm Arm/Disarm


BTW it's a 2000 4.7L


I even picked up the repair manual, and the module still gives me probs with this.

 

what kinda alarm...brake wire? is it a DEI if so...saftey switch connected?

 

idk, I don't have any kind of alarm on it, but they mentioned vehicles have the anti-theft system which doesn't allow someone to try and hot wire

oh yea i forgot to mention I also have a wire connecting to teh white/tan wire from the brake switch.

 

sorry what kinda starter...

 

BullDog RS 1100

 

You hooked up both (2)power wires correct...?

Hood pin installed...working...?

Tach wire connected? Or tach mode off...?

 

power wires (were) both connected, but it did the same thing anyways...I was playing around with em.

the hood pin is connected and is workin.

tach is off.

 

tryed reseting the alarm...? oh yea what color is your key black or grey? also did you try the starter without the alarm bypass, i have a starter/keylessin my 02 and i didnt use the security bypass...

 

my key is black, and i tried without the alarm wire..still did the same thing. I'm sure teh brake and hood pin work tho, cuz i was able to switche from teh operator safety mode. I'm so confused with this thing.

 

reset it. pm me on aim messenger imnothot02