2nd Gen Neon 2000 - 2005 2nd Gen Neon

Comment and problem

Thread Tools
 
Search this Thread
 
  #1  
Old 03-20-2008, 09:09 PM
Kalevra's Avatar
Kalevra
Kalevra is offline
Record Breaker
Thread Starter
Join Date: Feb 2007
Location:
Posts: 1,506
Likes: 0
Received 0 Likes on 0 Posts
Default Comment and problem

Got my 60mm TB installed today. love it. more responsive, top end seems to have some more pick up.

and my problem is... My AXT seems to be 'jumpy' I would be driving normally. I would accelerate normally and it would shift but seem like it wasnt ready to shift, it would almost 'slam' into gear. it also happens when im stopping, it would downshift around 5-10 mph and slam in the same matter. I'm still under powertrain warrenty, should I take her in or is it something as simple like the mounts?
 
  #2  
Old 03-20-2008, 09:23 PM
SiX1N9N3's Avatar
SiX1N9N3
SiX1N9N3 is offline
Rookie
Join Date: Feb 2008
Location:
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

take it in.... hopefully they wont say your mods are the problem...then... i would think that might void it... if your mods are the problem...

[IMG]local://upfiles/84053/D4A9562659C547B7A4D9E9C81884C86B.jpg[/IMG]
 
  #3  
Old 03-20-2008, 09:25 PM
mjj1587's Avatar
mjj1587
mjj1587 is offline
Rookie
Join Date: Oct 2007
Location:
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

take it in for sure...i just spent $1200 rebuilding my tranny because i neglected to get it checked when i initially thought there was a problem w/ it.
 
  #4  
Old 03-20-2008, 09:30 PM
Kalevra's Avatar
Kalevra
Kalevra is offline
Record Breaker
Thread Starter
Join Date: Feb 2007
Location:
Posts: 1,506
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

My warenty cannot be voided. nothing was modded internally, therefore. the warrenty is still intact.
 
  #5  
Old 03-20-2008, 09:30 PM
GrApHite03's Avatar
GrApHite03
GrApHite03 is offline
Join Date: Oct 2005
Location: Honolulu
Posts: 2,019
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

The ECU uses throttle position as one of the determining factors of what shift schedule to look for. So in some cases the TB or new TB can effect the way a tramission shifts.

k3v
 
  #6  
Old 03-20-2008, 09:34 PM
Kalevra's Avatar
Kalevra
Kalevra is offline
Record Breaker
Thread Starter
Join Date: Feb 2007
Location:
Posts: 1,506
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

I've had this problem before the TB. forgot to add that in

and the new TB utilizes the stock TB sensor
 
  #7  
Old 03-20-2008, 10:14 PM
Kalevra's Avatar
Kalevra
Kalevra is offline
Record Breaker
Thread Starter
Join Date: Feb 2007
Location:
Posts: 1,506
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

So you think I should take her in?
 
  #8  
Old 03-20-2008, 10:33 PM
inthewerks's Avatar
inthewerks
inthewerks is offline
Veteran
Join Date: Jan 2008
Location: Tucson, AZ
Posts: 262
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

i would take it in. even though you think they wont say anything about your mods because nothing is "internal", i would puther back to stock before i brought her in. just to save yourself some trouble. plus, if you brought her in like she is and they do have a problem with warranty work, they will post a red flag on your car when you bring her back again and screw you royally. so yeah, bring her in but put her back to stock first. just speaking from experience.
 
  #9  
Old 03-20-2008, 10:41 PM
Kalevra's Avatar
Kalevra
Kalevra is offline
Record Breaker
Thread Starter
Join Date: Feb 2007
Location:
Posts: 1,506
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

I do not have my stock airbox anymore. nor my stock coil pack
 
  #10  
Old 03-20-2008, 11:05 PM
inthewerks's Avatar
inthewerks
inthewerks is offline
Veteran
Join Date: Jan 2008
Location: Tucson, AZ
Posts: 262
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Comment and problem

ouch. could be a problem.
 


Quick Reply: Comment and problem



All times are GMT -4. The time now is 08:22 PM.