What Did You Do To Your 2ND GEN RAM Today?
maybe they just overcharge in canaydia...
I don't remember it costing that much when I did my shoes and wheel cylinders on my rear axle. and being a 3/4 ton they are bigger...I had my drums turned though. They still had plenty of life left to them. $10 a drum to turn
Think my shoes were like $50-60 (I get commercial discount as well)
I don't remember it costing that much when I did my shoes and wheel cylinders on my rear axle. and being a 3/4 ton they are bigger...I had my drums turned though. They still had plenty of life left to them. $10 a drum to turn
Think my shoes were like $50-60 (I get commercial discount as well)
Just some pix of said parts.
Got the other spring perch off today and did some wire wheeling.
Think I found my water source.
Even though I have condensate flow to the outside world, there is a small trickle from the condensate tube on the inside at the firewall.
Is the tube a separate part, or a molded part of the box?
What path does the condensate take from the inside of the box to the inside of the firewall?
Even though I have condensate flow to the outside world, there is a small trickle from the condensate tube on the inside at the firewall.
Is the tube a separate part, or a molded part of the box?
What path does the condensate take from the inside of the box to the inside of the firewall?
On closer investigation today, it looks like the condensate might be tracking along the bottom of the condensate tube, and going between the tube and the firewall grommet, hitting the back of the box and dripping down on the inside of the firewall.
I think I might try putting a tywrap around the condensate tube outside of the firewall... the water should hit the tywrap and drip from there.
I think I might try putting a tywrap around the condensate tube outside of the firewall... the water should hit the tywrap and drip from there.
An elbow sounds like a good idea.
Got to drive it today Even better it was offroad! We had a whole ton of grass, sticks, branches leaves and their ilk to get rid of, so we took all my scrap out of the bed, loaded all the sticks and everything in and took off. Apparently theres a small trail entrance on my road i had no idea about! So we went back there, emptied the stuff out and I went and drove around a bit, got the 4x4 goin as well. Didnt need it , it just hadnt been used since I took insurance off it in february I think it was. Pics will be in the picture thread shortly
God knows what my dash really looks like, its got a plastic cap over it that's duct taped on because the black instrument bezel is cracked as well. so I covered all that up with a carpet dash cover that's held on by velcro.
Granted, mine has a giant hole in it. Still got that piece floating around my desk here somewhere. lmao