Captain
Played in the snow and put gas in her and gettin ready for more snow and some good old fashioned drift bustin. Gotta love 4wd. Oh and split my gates cerpentine belt. dunno how that happened. But got it replaced. Now my next thought is do they make skidplates for the 2nd gen and where to find them.
Grand Champion
Quote:
what bearing? i know that the intermediate shaft will plop down when you pull it out of the carrier, but i don't remember a bearing.Originally Posted by LILRED5.9-5-SPEED
95Ram360...When you do the passenger side seal and remove the axle there is a tendancy for the bearing that is close to the diff to fall down. This will cause you to keep blowing seals. Just keep that in mind. I found out the hard way.
Quote:
you copied me!Originally Posted by dodgeram07
i made this......... i copyed....lol
Veteran
spent 3 1/2 hours washing, clay baring, and waxing the truck to get all the road salt and grime off. wheels are screwed, they are pitted and rustin away. in the market to get some different ones once the tires wear out.
Legend
Slid down the side of the driveway at the new house. Some kids in a nice Duramax and a Dakota stopped and helped push my dad out of the ditch. Then the Sheriff had to stop traffic so my dad could get a better run at the hill in low range. Some of the perks of living on the divided 4-lane U.S. 50!
Then got the snowblower out and blew the whole driveway. That old Ariens is a beast!
Then got the snowblower out and blew the whole driveway. That old Ariens is a beast!
Banned
Yet again, Seafoamed, changed transmission fluid,filter, took off TB cleaned it out, put in new IAC motor, new battery clamps positive and negitive, new PCV valve and new egr valve.
more to come next week.
more to come next week.
Veteran
Bought some seafoam for it, Fixed the window (droped the window when it was froze and never went back in track right), looked at putting my hitch back on, layed out the wiring for the back up light im installing, Going to make a nice DIY with pics for the hitch and back up light. Played in the snow too. I love it. about 9" here. with more on the way.
Also, I really do not want to take my intake asmbly loose is there any other way to seafoam with the whole smoke show? Or do i have too? And what instructions are there on this?
Also, I really do not want to take my intake asmbly loose is there any other way to seafoam with the whole smoke show? Or do i have too? And what instructions are there on this?
