What Did You Do To Your 2ND GEN RAM Today?
#3341
I filled mine up with a tank of supreme today... ouch It was pingin like a **** this mornin, so I thought i'd give er some good stuff again... Took about 10 km down the road and it was purrin like a kitten again(well, roarin like a lion maybe ). I couldn't beleive the difference the supreme makes in it when it's pingin bad.... It's just like a woman, high maintenance and likes the pricey things lol... like the sayin goes, 'if it's got **** or tires, it's gonna cost ya money'
oh, and I pulled the airbox off dad's truck tonight, surprise surprise, guess whats in there? I think he wants me to get my plenum fixed and then do his... maybe I'll have an extra set of hands for the job though....
oh, and I pulled the airbox off dad's truck tonight, surprise surprise, guess whats in there? I think he wants me to get my plenum fixed and then do his... maybe I'll have an extra set of hands for the job though....
#3342
#3344
#3345
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
If thats the case with the keyways, Couldnt I just take the t-chain off where it is when get down to it? as long as i dont rotate the cam or crank, itll be the exactly the same as if i hadnt replaced it?
or should i still make the notches line up?
"
" -01 Ram FSM
What does it mean by step 3 of installation?
can anyone clarify this?
wouldnt the replacement go on the exact same way? or am i missing something here?
or should i still make the notches line up?
"
INSTALLATION
(1) Place both camshaft sprocket and crankshaft
sprocket on the bench with timing marks on exact
imaginary center line through both camshaft and
crankshaft bores.
(2) Place timing chain around both sprockets.
(3) Turn crankshaft and camshaft to line up with
keyway location in crankshaft sprocket and in camshaft
sprocket. sprocket on the bench with timing marks on exact
imaginary center line through both camshaft and
crankshaft bores.
(2) Place timing chain around both sprockets.
(3) Turn crankshaft and camshaft to line up with
keyway location in crankshaft sprocket and in camshaft
" -01 Ram FSM
What does it mean by step 3 of installation?
can anyone clarify this?
wouldnt the replacement go on the exact same way? or am i missing something here?
#3346
Changed the Oil and Trans Fluid/Filter, and ran a compression check 125-135 psi across all 8cyl. But, Uh Oh, Metal shavings in the trans pan! Seems to have gained some sort of power but every vehicle I've killed runs great before it dies... Still have another trip to Illinois coming up. Let's see how that goes.
#3348
#3349
I took off the black strip on my tailgate and the double sided tape left marks and I couldn't get it off. I tried goo gone, gas and lighter fluid with no luck. Got that wheel and had it done within 10mins.