turn the gain down on the amp, thats a protect mode. it protects the amp in events such as over heating, over powering, underpowering, and short circuits

 

PEED OFF- dropped truck off at the shop up the road. was out on porch having a cig seen my truck flying down the road, so i waited to watch it come back up and they hammered it from the stop sign they let it wind all the way to 2nd let off and didnt hear anything for 5-7 secs and heard it wind up again im pissed!

 

thanks 004x41500 ill try that out...my gain IS 3/4 the way up.




and lastrights id confront them about it and see what they say. thats BS

 

Oh damn!!!!!!!! Sum one doing to be killed

 

Well, I started a couple days ago but I checked all my tracking numbers and before the end of the week I should have new rotors, brake pads, roller rockers, dual steering stabilizer, and a belt that bypasses a/c. Think I have a few more things to order then all I have to do is get the rest of the tools I need and I'll be able to put her down for a weekend. Oh and I need to start printing some DIY's....

 

Yet another reason why i do my own repairs. Dont trust your rig to any one.

 

What were they fixing on your truck and I would have been at the shop within 5

 

they called said my ujoints and ball joints were bad driver side mirror needed replaced due to 1 crack! i dunno what else going to have to check out the bill tommorrow when i get it round about 600 dollars ! i brought it in for state inspection and emmisions

 

after you get the truck back i would punch them in the mouth.

 

That is some bs. taking your truck down the road and flooring it like they did.