looked at it, and relized i still wont be driving her for another couple weeks....i miss my truck, but i got to say, my maxima has ice cold a/c, and it was 97* yesterday, and supposed to be 85+ today

my truck's a/c needs a recharge i think

 

well it wasnt today but starting Last Friday, I took off the intake valve covers and rockers and valve springs, changed all the valve seals, then i snapped a bolt off into the plenum pan..took all day to get out after i snapped off the bolt into the thermostat neck lol...

put in the 180 stat, finally finished the plenum gasket, put everything back together, had a problem with valve lash, took valve covers back off, figured out (thanx to this site) they get torqued down, changed the oil and filter and put in new plugs

took out seats and carpet and headliner... powerwashed the carpet, took apart the headliner pulled off the sagging stained fabric scraped off all the foam , used 4m spray glue and new cloth for a custome new headliner...(for under 30 bucks)

all in all took 6 straight days but all turned out great,... you tube video to follow

 

got the starter in,,,,,, try putting in sender unit in the trans but having problems

 

Damn Bro, you got me tired just readin all that work you did. I did crack up reading about snappin the bolts off. Good stuff

 

got it running drove it this morning running around town......... check engine light come on then off when i turned it off so i dont know whats going on there



nice to be back on the road still need the front aligment

 

Congrats bud good to see ya got her running again. I was getting ready to tell ya that I was gonna come over there so you can get your truck done. lol

 

Pulled my transfer case out and found out that I need to make a minor change to my little DIY that I did. It's much easier to pull that thing if you leave the crossmember and transmission mount in place.

 

yeah bro its funny now but not when i was doing it lol

at least its almost all done what a project

 

well today, i changed my oil switched to quaker state peak performance conventional 10w-40 and purolator classic filter.

 

Got a little mud on the tires. I was only trying to get closer to the river. Turns out the trail goes through the river. Hell, why not?