OK, Im new at this, whats it look like?

*gives diving in the manual*

 

got the pics up of the truck in my cowl hood thread.

https://dodgeforum.com/forum/2nd-gen...-coming-4.html


so far im liking it getting alot of looks from the ford and chev guys sct and airgap here i come

 

Put the door panels back on to finish up my passenger window issue, cleaned out the cab, put the dash bezel back on and drove it down to a shop for safety inspection and a front end alignment.

Lets hope I got everything done up right and I don't have to fix anything else. I wanna use the truck for hauling my slide in camper this weekend!

 

Cleaned my pre-cat O2 sensor and seafoamed the truck and my rough idle is gone. It took awhile after I seafoamed it but I do believe that did the trick. Something must have gotten where it shouldn't while I was doing the Airgap swap.

 

I've begun to think we need an Oxygen Sensor Club.

I'd bet that the O2 sensor did more to clean up the idle than the SeaFoam did. An end-of-life oxygen sensor will cause a lean mixture every darn time.

Either way, it's good to know that there's another strong-running Ram in the neighborhood.

 

fixed my a/c!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

Got the rear bumper rough sanded and ready for primer surfacer.
Sprayed color coats on my rear bed panel.
Color spotted some chips.
Wire brushed all the bumper fasteners and treated them to a coat of rust converter.
After today I will have 31 days to have my truck ready for a charity car show in BA.
I have a lot to do yet.

 

put stock fan back on...... now a can feel the differnce the e-fan made alot easy taking off form stop sign,, it was just to much on the alt at night headlights,e-fan, and blower for the a/c

 

You must have had a ****ty one. I haven't had any problems. Or you have the smaller alt maybe.

 

the lincon mark v111 with the blower efan and headlights on the headllights word dim and blower would slow down a little,,, this is at idle,, i have a 120amp alt

the e-fan pulls like 33amp