What color is the new plow blade?

 

sorry, i forgot that the color of your belongings matters here... lol


























its yellow.

 

I think he was hoping you'd say pink

 

Discovered a very annoying squeak from the driver side front tire. Took off the tire and brakes, sprayed everything out, seems to still squeak - expect a new squeaky video in the tech section if it doesn't go away....

 

Went to the scrap yard today, they had a 99 1500 extended cab with the same color interior as my 2500 so I picked up some interior parts.. Glove box, cup holder, piece under steering wheel and the 2 pieces that go down along the windshield a AM/FM/CD Cassette and a 60/40 seat for $50... Got everything installed except the seat, the seat will need to be modified because my seat mounts are higher. My buddy has a seat in a 2500 with a 60/40 and were gonna see if we can swap out the brackets if not we'll be cutting and welding something up.

 

Ok finally got the front of the truck lifted today. Had to cut the lower arm cam bolt off. Went to the dealership to get the new bolt and it cost $34. I new the parts guy and he gave me the employee discount so I paid $24 still a lot for 1 bolt but oh well I needed it. Also put the duel steering stabilizer on. Started to do the work on the rear and just about all the bolts are rusted on. So I'll start again in the morning. The directions said this was a 4 to 6 hour job I've never done something like this and Im doing it by myself in my drive way so far its been about 11 hours just to get the front done.

 

i bought a bunch of fancy new tools, and a bunch of small tools boxes to store stuff for the trip in. i stole knuckles idea about modualrity. however, i used platic tool boxes instead of ammo cans. 1 for fluids, 1 for tools, 2 small ones for scrounge, and a bigger one for the recovery gear. i also installed a 14x3 and found out my a/c condensor has a giant hole in it(no wonder i havent had cold a/c in a while)

 

Put up your modulariteeenessszzz!! Yup, that's my similar breakdown on stuff. I'm trying to decide a good size for First Aid. Not too big that the Mrs. can't lug it at my head. This one might actually be a plastic one. I did look at those as a choice.

holes... lol <--- looked funny to use.

 

got my new plow today. 2012 Fisher 8' HD mm2 straight blade. i DO have some pics.

Old Plow was a Fisher 8" HD mm1 straight blade






New Plow.

 

Fixed my sagging doors with a couple of washers and the diy thread

https://dodgeforum.com/forum/2nd-gen-ram-faqs-diys-and-how-to-s/232877-diy-sagging-door-fix.html

Took me about a hour but thats because I had to realign the door pin

I really like how it turned out and it only costs me $1!

The reason I did this is because lately my drivers door did not want to close all the way and I was tired of hearing the door rattle every time I hit a bump.

While I was installing the washers I also found out the head of the lower bolt on the upper hinge is snapped off.

How would I get this bolt out? I tried taking the door panel off but there is very little thread showing.