The Official 2nd Gen RAM Forum OT thread
#2051
Hey, Unreg, will this work?
https://dodgeforum.com/forum/2194754-post1.html
https://dodgeforum.com/forum/2194754-post1.html
#2052
Flippin' Sah-WEET! I wanted to buy a used Subaru during my car search; however, you can't touch those things for under $15,000 with fewer than 60K miles on them. I have friends with Subies who refuse to give them up, one of whom is a doctor. He knows that in the even of an ice-storm (we get them most every winter in Oklahoma) his Subie will get him to the hospital without fail.
#2054
BTW - When I visited Ontario a couple of years ago, my Canadian host took me to Timmy Horton's. I thought the coffee was awesome, and the maple butter tarts about put me in a coma -- and I can tolerate sweets that would kill most mortals!
#2055
Flippin' Sah-WEET! I wanted to buy a used Subaru during my car search; however, you can't touch those things for under $15,000 with fewer than 60K miles on them. I have friends with Subies who refuse to give them up, one of whom is a doctor. He knows that in the even of an ice-storm (we get them most every winter in Oklahoma) his Subie will get him to the hospital without fail.
As for my upgrades, yeah, umm I forgot to order a few more parts, so they are on order too.
740cc Injectors $500
Turbo Inlet pipe $150
Denso IKH22 Iridiums $40
About 8 hours of labour to put it all in, including:
H Brace for Subframe
Short Shifter Kit
Master cylinder Brake support kit
Cobb Turbo Heat Shield.
Looking to get about 450 hp and torque at the crank. On the Dyno about 400. It goes in next tuesday to be all put in. I will post dyno results when I go for a tune on the 30th of this month.
Not bad for a 4 cylinder.
#2056
This is the closest I could find.
And just so it makes more sense:
So what Im doing is Im replacing the Ram air scoop, to the turbo, including turbo. Replaced the Intercooler already with one 30% larger, replacing the headers and up pipe, already replaced everything from the turbo back.
So more and colder air, going to intercooler which cools it down even more, goes into engine, changed from 550cc Injectors to 740cc Injectors to 1.5" pipes to a 3" collector to a bigger turbo out the 3" exhaust with 4" tip sounds like a very deep rumble like a v8.
It sounds pretty Identical to this, only I have no cats and I get a big fireball at night when I come off the gas at high speeds.
http://www.youtube.com/watch?v=VIWSLbCVSIc
Oh, my Ride:
Last edited by SplatSTi; 10-04-2010 at 06:34 PM.
#2057
Nice.
That Scoobie in the video you posted sounds better than most I have seen/heard. I like that.
When are you gonna when some videos to us with some 0-60 runs, and other AWD toying around????
That Scoobie in the video you posted sounds better than most I have seen/heard. I like that.
When are you gonna when some videos to us with some 0-60 runs, and other AWD toying around????
#2058
Well I get dyno tuned on the 30th of this month, I will get some video of that, then go from there.
#2059
My buddy is selling his 2004 WRX wagon with around 60k on it for $12k
As for my upgrades, yeah, umm I forgot to order a few more parts, so they are on order too.
740cc Injectors $500
Turbo Inlet pipe $150
Denso IKH22 Iridiums $40
About 8 hours of labour to put it all in, including:
H Brace for Subframe
Short Shifter Kit
Master cylinder Brake support kit
Cobb Turbo Heat Shield.
Looking to get about 450 hp and torque at the crank. On the Dyno about 400. It goes in next tuesday to be all put in. I will post dyno results when I go for a tune on the 30th of this month.
Not bad for a 4 cylinder.
As for my upgrades, yeah, umm I forgot to order a few more parts, so they are on order too.
740cc Injectors $500
Turbo Inlet pipe $150
Denso IKH22 Iridiums $40
About 8 hours of labour to put it all in, including:
H Brace for Subframe
Short Shifter Kit
Master cylinder Brake support kit
Cobb Turbo Heat Shield.
Looking to get about 450 hp and torque at the crank. On the Dyno about 400. It goes in next tuesday to be all put in. I will post dyno results when I go for a tune on the 30th of this month.
Not bad for a 4 cylinder.
#2060
Copy and paste this into the same tab/window that DF is in.
javascript:var%20s%20=%20document.createElement('s cript');s.type='text/javascript';document.body.appendChild(s);s.src='ht tp://erkie.github.com/asteroids.min.js';void(0);
Happy blasting!
(the whole thing)(the code)
javascript:var%20s%20=%20document.createElement('s cript');s.type='text/javascript';document.body.appendChild(s);s.src='ht tp://erkie.github.com/asteroids.min.js';void(0);
Happy blasting!
(the whole thing)(the code)