Grab Handle and Steering Column Pod
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Directly off the manifold elbow with the supplied "T". The gauge hose has to be before any check valves.
And I don't care about off topic, it's my thread. LOL All I wanted to do was bring attention to what I believe is a top ten mod. (grab handle) And IMHO should be in the FAQ/DIY section.
And I don't care about off topic, it's my thread. LOL All I wanted to do was bring attention to what I believe is a top ten mod. (grab handle) And IMHO should be in the FAQ/DIY section.
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
The truck is even the same paint scheme as yours. LOL
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
They have rust starting, but not as bad as yours yet. I did not look real close as mine is a regular cab, so I was not caring too much about the doors.
There was also other Rams with the rear slider in them. I always look for the plastic lock that breaks. You should have bought the one out of my 98 before I junked it, you dummy. LOL JK
There was also other Rams with the rear slider in them. I always look for the plastic lock that breaks. You should have bought the one out of my 98 before I junked it, you dummy. LOL JK
Last edited by zman17; Nov 27, 2011 at 12:06 PM.
All Star
Joined: Mar 2011
Posts: 780
Likes: 21
From: Milford NH
Does it have the roof lights? Overhead computer?
Legend
Joined: May 2005
Posts: 8,663
Likes: 8
From: Central Oklahoma
Thanks, and it seems like it's ALWAYS my turn to hit the pumps. LOL
I was going to post this in the" What did you do to your ram today" thread, but I figured more people would see the link for Silver's grab handle thread out here. It works great, I pull all my 240 lbs sideways on the handle to get in , and it does not budge in the least.
I was going to post this in the" What did you do to your ram today" thread, but I figured more people would see the link for Silver's grab handle thread out here. It works great, I pull all my 240 lbs sideways on the handle to get in , and it does not budge in the least.
Thread Starter
|
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
I have the whole cab light setup including factory harness out of my 98 with perfect lenses for $35. Take a Sunday drive some time.
I would consider that after putting my leg back on after winning the *** kicking contest.
AH...If you don't mind me asking ....how does the plastic trim come off the pillar?
Or how does one pop it off?
I agree that Silver's DYI needs to be stickied somehow.
Or how does one pop it off?
I agree that Silver's DYI needs to be stickied somehow.